User manual
ACN IRIS 3000 VIDEO PHONE USER MANUAL
21
3-6-3. Upgrade
The Upgrade section shows the details of your video phone’s software. YOU ARE UNABLE TO ADJUST ITEMS IN THE UPGRADE MENUS.
PLEASE CONTACT ACN TECHNICAL SUPPORT FOR ASSISTANCE – 888-414-1958 (U.S.) or 866-913-3445 (Canada).
3-6-4. Administrator
The Administrator menus provide access to more complex settings, such as SIP, A/V Codec setting, DNS, Proxy and LAN settings. YOU
ARE UNABLE TO ADJUST ITEMS IN THE ADMINISTRATOR MENUS. PLEASE CONTACT ACN TECHNICAL SUPPORT FOR ASSISTANCE
at 888-414-1958 (U.S.) or 866-913-3445 (Canada).
3.7 Digital Photo Frame
Before attempting to use Digital Photo Frame, go to Personal Options under System Settings. Check the Digital Photo Frame Box to enable the
feature. Press the Back button and click yes to save the change.
Insert the USB device or SD card into
your phone.
Select “Digital Photo Frame” from the
Main Menu and Press OK.
Select “View Another Picture”
and Press OK
Select the location (USB or SD) and
the folder where your pictures are
stored and press the Right Arrow
Key
NOTE: If you remove the SD or USB device from the phone, Digital Photo Frame will run the rst 100
pictures saved on the phone.
Select the folder where the pictures
are stored or select individual photos
inside the folder or multiple folders
on the device.
To initialize Digital Photo Frame, you must turn Digital Photo Frame “On” and set the desired delay between photos in the Personal
Options menu.
Select “Settings” in the Main Menu
and Press OK
Select “System Settings” in the
Settings Menu and Press OK
System Settings Menu Select “Display” in
the System Settings Menu
Digital Photo Frame On/Off Digital Photo Frame Delay
NOTE: If you are displaying large
photos (more than 3 mega pixels),
set the delay to 20 seconds to
allow time for each photo to load.
Scroll down to Digital Photo Frame
and check the box by pressing OK to
enable Digital Photo Frame “On.” Or,
uncheck the box if you would like to
turn it off.
Select the amount of delay you wish
in between each Digital Photo Frame
from “15, 20, 25 or 30 seconds.”
Press the BACK button when
finished. Select “Yes” to save and
Press OK










