APM5084 8.4” industrial panel mount LCD monitor User Manual APM5084: 8.4” industrial panel mount LCD monitor 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor Table of Contents CHAPTER 1 Introduction 1-1 Important Safeguards......................................................................................................................1 1-2 Before Installation...........................................................................................................................2 1-3 Unpacking................................................................................................................
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 1 INTRODUCTION 1-1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover: - Any product, on which the serial number has been defaced, modified or removed.
APM5084 8.4” industrial panel mount LCD monitor 1-2 Before Installation - It is very important to locate the LCD Display in a suitable environment. - The surface for placing and fixing the LCD Display should be stable. - Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. - Convenience for connecting the LCD Display to the related facilities should be well considers too.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 2 FRONT ALUMINUM LCD PANEL 2-1 Package Contents 1. LCD Display x 1 pc 2. 6” VGA Cable (male to male) x 1 pc 3. User Manual x 1 pc 4. Power Cord x 1 pc 5. Auto switch Power Adapter x 1 pc 6. Mounting bracket x 4 pcs 7. M4*50mm screw x 4 pcs ** Remarks: item 6-7 are for installation 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved.
APM5084 8.4” industrial panel mount LCD monitor 2-2 Structure Diagram Front View Rear View 1. Rear Case 2. Class A TFT LCD Panel 3. 4mm Protective Glass 4. 6mm Aluminum front Bezel 5. LCD Membrane 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor 2-3 Mounting Method Bracket Mounting 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor 75mm VESA Standard: ** Remarks: - Hardware and M4*4 pcs for VESA mounting is not provided - To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (6mm) of the display mounting holes. Using screws that are too long may cause damage to your display. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 3 CONNECTION 3-1 On-Screen Display Operation 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor 3-2 On-Screen Menu 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 4 OPERATION 4-1 LCD Specifications 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 5 AV/ BNC OPTIONS 5-1 AV/BNC Options ** Remarks: Package includes 1x 6ft S-Video cable 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 6 TOUCHSCREEN OPTIONS 6-1 Touchscreen Options 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor ** Remarks: - USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc - Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc - For detailed information, please refer to the attached CD disc - As the touchscreen unit is not made of toughened glass, please handle it carefully 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.
APM5084 8.4” industrial panel mount LCD monitor 6-2 Touchscreen Quick User Guidelines Calibration: Tool property page- Calibration, draw test tools and the linearity curve of the touchscreen were list in this property page shown as below for user to do touchscreen calibration and touch position test. User can do calibration or draw test by pressing the function push buttons. 1. Linearization Curve Linearization curve of the touchscreen is list in this page for reference and trouble shooting purpose.
APM5084 8.4” industrial panel mount LCD monitor 2. 4 points calibration It needs calibration before the touchscreen can work accurately. Whenever the user feel the accuracy lost, user can do calibration again to get a more accuracy touch function. Pressing this button, a new window will be popped-up at the location when the touchscreen was mapped to area for this touch system to guide the user do 4 points calibration.
APM5084 8.4” industrial panel mount LCD monitor Pressing this button, a new window will be popped-up at the location when the touchscreen was mapped to area for this touch system to guide the user do 25 points calibration. User should follows the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation. In addition, a time line bar is shown in the bottom of the window to indi- cate time elapsed.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 7 DC POWER OPTIONS ** Remarks: Package does not include power cord and AC power adapter 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 8 TV TURNER OPTIONS ** Remarks: Package includes 1 x remote controller 8-1 How to use Remote Controller 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 9 AUDIO INPUT OPTIONS 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 10 TROUBLESHOOTING 1. How do I adjust the resolution? To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter- mined by the display card in your computer. 2.
APM5084 8.4” industrial panel mount LCD monitor 8. Why can the display not match to the touchscreen correctly after calibration? The touchscreen will be aged after a certain period of consumption or under harsh environment. It is normal. The touchscreen driver has an utility to adjust the situation. The calibration point can be more on the touch screen. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved.
APM5084 8.4” industrial panel mount LCD monitor CHAPTER 11 CLEANING THE LCD DISPLAY You may need the following precautions before you begin to clean the LCD display, please read and understand the details below fully. 1. Make sure the monitor is turned off 2. Never spray or pour any liquid onto the screen directly 3. To remove dust and other particles, wipe the screen with a clean, soft, lint-free cloth. 4.