APW 5400 40” Wide Industrial LCD monitor User Manual APW 5400: 40-inch wide screen industrial panel mount monitor 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor Table of Contents CHAPTER 1 Introduction 1-1 Important Safeguards......................................................................................................................1 1-2 Before Installation...........................................................................................................................2 1-3 Unpacking.......................................................................................................................
APW 5400 40” Wide Industrial LCD monitor CHAPTER 1 INTRODUCTION 1-1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover: - Any product, on which the serial number has been defaced, modified or removed.
APW 5400 40” Wide Industrial LCD monitor 1-2 Before Installation - It is very important to locate the LCD Display in a suitable environment. - The surface for placing and fixing the LCD Display should be stable. - Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. - Convenience for connecting the LCD Display to the related facilities should be well considers too.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 2 FRONT ALUMINUM LCD PANEL 2-1 Package Contents 1. LCD Display x 1 pc 2. 6” VGA Cable (male to male) x 1 pc 3. User Manual x 1 pc 4. Power Cord x 1 pc 5. S-Video cable x 1 pc 6. RCA cable x 1 pc 7. Remote Controller x 1 pc ** Remarks: Wall mounting set is already installed on the back of the LCD panel 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved.
APW 5400 40” Wide Industrial LCD monitor 2-2 Structure Diagram Front View Rear View 1. Rear Case 2. SAMSUGN class A TFT LCD Panel 3. 6mm Aluminum front Bezel 4. LCD Membrane 5. Wall-mount bracket 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 2-3 Mounting Method Wall Mounting ** Remarks: Wall mounting set is already installed on the back of the LCD panel. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 100mm VESA Standard: ** Remarks: - Hardware and M6*8pcs for VESA mounting is not provided - To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (6mm) of the display mounting holes. Using screws that are too long may cause damage to your display. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 3 CONNECTION 1. Video out 2. Video 1 3. Y 4. Pb 5. Pr 6. Video 2 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 3-1 On-Screen Display Operation 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 3-2 On-Screen Menu 1. Picture: - Picture Mode: Normal / Soft / Vivid / User mode to choose - Brightness: Adjust background black level of the screen image - Contrast: Adjust the difference between the image background (black level) and the foreground (white level) - Saturation: Adjust the saturation of the image color - Sharpness: Adjust the image from weak to sharp - Hue: Adjust the screen hue value 2.
APW 5400 40” Wide Industrial LCD monitor 4. PC: - H. Position: Align the screen image left or right - V. Position: Align the screen image up or down - Clock : Adjust the clock value - Phase: Adjust the phase value - Auto Sync: Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. 5. Advance: - Scale: Select the scale - 16:9 or 4:3 - 3D NR: Low / Mid / High / Off mode to choose - Color Temp.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 4 OPERATION 4-1 LCD Specifications 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 5 TV TUNER OPTIONS 5-1 TV Tuner Options 1. Video out 2. Video 1 3. Y 4. Pb 5. Pr 6. Video 2 ** Remarks: Package includes a remote controller 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 5-2 How to Use Remote Controller 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 6 QUAD DISPLAY OPTIONS 10-1 Specifications 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor ** Remarks: - For more details, please refer to Quad Display User Manual 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 7 TROUBLESHOOTING 1. The membrane power light is not ON - Press the power On / Off on LCD membrane to check if the monitor is in the ON mode. - Check the power cord is properly connected to the LCD display and power outlet. 2. Power does not turn ON - Check whether the power plug is securely inserted into the receptable. 3. No picture are displayed - Check cables for disconnection. - Check whether the power for all inout equipment is ON.
APW 5400 40” Wide Industrial LCD monitor CHAPTER 8 CLEANING THE LCD DISPLAY You may need the following precautions before you begin to clean the LCD display, please read and understand the details below fully. 1. Make sure the monitor is turned off 2. Never spray or pour any liquid onto the screen directly 3. To remove dust and other particles, wipe the screen with a clean, soft, lint-free cloth. 4.
