Instruction Manual
F71879 Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Restore AC Power Loss
Off
When power returns after an AC power failure, the systems power is off. You must press the
Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state where you left
off before the power failure had occurred. If the systems power is off when AC power failure
occurs, it will remain off when power returns. If the systems power is turned on when the AC
power failure occurs, the system will power-on when the power returns.