Manual

© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
FES6850
Fanless Embedded Controller comes with
Intel Celeron M 600MHz Processor
Step 4 - Install Realtek AC97 codec Driver
1. Click on the Step 4 - Realtek AC97 codec Driver folder and then double click on the
wdm_a361.exe
2. Follow the instructions that the window shows you
3. The system will help you install the driver automatically
Step 5 - Install USB Card Reader Driver
1. Click on the Step 5 - USB Card Reader Driver folder
2. Double click on the setup.exe
3. Language setting: Choose the highlighted item below to operate your system in English.
4. Follow the instruction that the window will show to finish the installation.
Note:
Under the Window OS environment, if the CRT connector is connected to display monitor by
the data switch device, the user need to set the color and resolution from Intel Graphic utility
(VGA driver) instead of setting from the control panel in case of the wrong display appearance.