User guide

3.2.12 Audio Connector
These two audio jacks ideal are for Audio Mic-In and Audio Line-out.
Pin
Signal
1
Line Out
2
Microphone In
3.2.13 Ethernet Connector (LAN1, LAN2)
The RJ-45 connector is for Ethernet. To connect the board to a 1000/100/10 Base-T
hub, just plug one end of the cable into connector and connect the other end (phone
jack) to a 1000/100/10-Base-T hub
Pin
Signal
Pin
Signal
L1
MDI0+
L5
MDI2-
L2
MDI0-
L6
MDI1-
L3
MDI1+ L7
MDI3+
A
B
L4
MDI2+ L8
MDI3-
A Active LED (Yellow)
B 100 LAN LED (Green)/ 1000 LAN LED (Orange)
3.2.14 ATX Power On/OFF Button
The ATX power button is on the I/O side. It can allow users to control eBOX730-860-
FL power on/off.
Function
Description
On
Turn on/off system
Off
Keep system status