FPC 5121 Industrial Fanless Panel PC User Manual FPC5121: 12.1” Industrial Fanless Touch Panel PC with Atom N2600 1.6GHz Processor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 5121 Industrial Fanless Panel PC Disclaimers This manual has been carefully checked and believed to contain accurate information. Acnodes Corp. assumes no responsibility for any infringements of patents or any third party’s rights, and any liability ar ising from such use. Acnodes does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. Acnodes does not make any commitment to update the information in this manual.
FPC 5121 Industrial Fanless Panel PC Safety Precautions Before getting started, please read the following im portant safety precautions. 1. The FPC5121 does not come equipped with an operating s ystem. An operating system m ust be loaded first before installing any software into the com puter. 2. Be sure to ground yours elf to prevent static charge when installing the internal components. Use a grounding wrist strap and place all electronic components in any static-shielded devices.
Ta ble of Conte nts Disclaimers .................................................................................................................................. ii Safty Precautions ....................................................................................................................... iii CHAPTER 1 1.1 1.2 1.2.1 1.2.2 1.2.3 1.3 1.4 1.5 INTRODUCTION........................................................................................................1 General Description .................
CHAPTER 1 INTRODUCTION This chapter contains general inform ation and detailed specifications of the FPC5121. Chapter 1 includes the following sections: General Description Specification Dimensions I/O Outlets Package List 1.1 General Description The FPC5121 is a fan-less and com pact-size touch panel com puter , equipped with a 12.1” TFT LCD display and low power consumption AtomTM N2600 1.6GHz processor. The FPC5121 ® supports Windows 7, WES 7.
1.2 Specifications 1.2.1 Main CPU Board CPU AtomTM N2600 1.6GHz processor onboard System Chipset NM10 Express BIOS America Megatrends BIOS System Memory One 204-pin DDR3 800MHz SO-DIMM sock et Maximum memory up to 2GB 1.2.2 I/O System Standard I/O 1x RS-232/422/485, 1x RS232 4x USB 2.
Power connector 1.2.3 FPC5121 : DC power 10~30VDC (phoenix type) System Specification 12.1” TFT LCD Heat Dispensing Design Disk drive housing: Net Weight One 2.5” SATA drive 2.48 Kgs (5.46 lb) Dimension (Main Body Size) 327.5x 52.5 x 261.8mm Operation Temperature 0℃ to 50℃(with W .T. DRAM/HDD in airflow condition) Relative Humidity Vibration 10% to 95% @ 40 , Non-Condensing 5 to 500 Hz, 2.
1.3 Dimensions This diagram shows you dimensions and outlines of the FPC5121.
1.4 I/O Outlets Please refer to the following illustration for I/O locations of the FPC5121.
1.5 Packing List W hen you receive the FPC5121, the bundled package should contain the following items: FPC5121 x 1 Panel Mount Kit x 6 Driver CD x1 Wall-Mount Kit x1 HDD Mylar x 1 If you cannot find the pack age or any items are m issing, please contact Acnodes distributors imm ediately.
CHAPTER 2 HARDWARE INSTALLATION The FPC5121 provides rich I/O ports and flexible expansions for you to m eet different demand, for exam ple, CF card. The chapter will show you how to install the hardware. It includes: CompactFlash ™ Card Serial Port Ethernet Mounting Way Hard disk Dram Wireless LAN Card 2.1 CF card Installation The FPC5121 provides one CF slot for users to install CompactFlash™ card.
Step 2 Find out the cover on the side of the system . Step 3 Locate the CompactFla sh TM socket, and insert the card into the socket.
2.2 Serial Ports Interface The FPC5121 has two onboard serial ports, COM1 (RS-232/ 422/ 485) and COM2 (RS232). The following table shows you the pin assignments of this connector: Pin Signal Pin Signal 1 Data Carrier Detect (DCD) 6 Data Set Ready (DSR) 2 Receive Data (RXD) 7 Request To Send (RTS) 3 Transmit Data (TXD) 8 Clear To Send (CTS) 4 Data Terminal Ready (DTR) 9 Ring Indicator (RI) 5 Ground (GND) In addition, COM1 can be set for RS-232/422/485 by jumper.
When COM1 is set to RS-422 or RS-485, the pin assignm ents are listed below: Signal Name Pin # RS-422 RS-485 1 TX- DATA- 2 TX+ DATA+ 3 RX+ No connector 4 RX- No connector 5 No connector No connector 6 No connector No connector 7 No connector No connector 8 No connector No connector 9 GND GND
2.3 Ethernet The FPC5121 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector.
2.4 Mountings – Panel/Wall/Desktop/VESA There are several m ounting ways for the FPC5121, Panel, W all, Desktop and VESA mountings. 2.4.1 Panel Mounting The FPC5121 is designed for panel m ount application. A s et of standard mounting kit are bundled with the system package that you can use it to mount the FPC5121.
2.4.2 Wall-Mounting The FPC5121 is designed for W all m ounting application. Please refer to the following steps: Find out the screws as marked on the back side of chassis.
2.4.3 Desktop-Mounting The FPC5121 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as m arked on the back side of chassis. Step 2 Assem ble the desk top stand to the chassis, and fix the screws.
2.4.4 VESA- ARM Mounting Step 1 Find out the screws as m arked on the back side of chassis. Step 2 Assem ble the VESA-ARM to the back side of the chassis, and fix the screws.
Step 3 VESA mounting Installation completed. Caution Use r ecommended/suitable mounting apparatus to avoid risk of injury.
2.5 H DD Installation The FPC5121 provides a convenient Hard Disk Drive (HDD) brack et for users to install 2.5” SATA HDD. Please follow the steps : 1. Unscrew six screws to remove the rear chassis. 2. Unscrew 4 screws from the HDD bracket, and take out HDD bracket.
3. Screw the 2.5e HDD, together with the HDD M ylar, to the HDD bracket. 4. Fix the HDD bracket into the system, and plug the data and power cable to HDD. Installation com plete.
2.6 DRAM Installation The FPC5121 provides one 204-pin DDR3 800MHz SO-DIMM socket that support system memory up to 2GB. Please follow steps below to install the mem ory m odules: 1. Open the back cover and find mainboard ( SBC87832). 2. Push down latches on each side of the DIMM sock et.
3. Install the m emory module into the socket and push it firm ly down until it is fully seated. The socket latches are levered upwards and c lipped on to the edges of the DIMM.
2.7 Wireless LAN Card Installation The FPC5121 provides one Mini card slot for user to install one wireless LAN card. W hen installing the wireless LAN card, refer to the following instructions and illustration: 1. Open the back cover and find mainboard ( SBC87832). 2. The socket latches are clipped on to the edges of the Mini card. Install wireless LAN card to the socket.
CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides user s with detailed description how to set up basic s ystem configuration through the AMIBIOS8 BIOS setup utility. Starting To enter the setup screens, follow the steps below: Turn on the computer and press the k ey immediately. After you press the key, the main BIOS setup menu displays. You can access the other setup screens from the main BIOS setup menu, such as the Chipset and Power m enus.
Left/Right The Left and Right keys allow you to select a setup screen. Up/Down The Up and Down keys allow you to select a setup screen or sub-screen. + Plus/Minus The Plus and Minus keys allow you to change the field value of a particular setup item. Tab The key allows you to select setup fields. F1 The key allows you to display the General Help screen. F10 The key allows you to save any changes you have made and exit Setup.
Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can alwa ys return to the Main s etup screen by selecting the Main tab. There are two Main Setup options. They are described in this s ection. The Main BIOS Setup screen is shown below. System Time/Date Use this option to change the system tim e and date. Highlight S ystem Time or System Date using the keys. Enter new values through the keyboard.
Advanced Menu Launch PXE OpROM Use this item to enable or disable the boot ROM function of the onboard LAN chip when the system boots up. Launch Storage OpROM Enable or disable boot option for legacy m ass storage devices with Option ROM. The Advanced menu allows users to set configuration of the CPU and other s ystem devices.
ACPI Settings You can use this screen to select options for the ACPI Settings, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ACPI Sleep St ate Use this item to select the highest ACPI sleep state the system will enter.
CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option. Hyper Threading Technology Use this item to enable or disable Hyper -Threading Technology, whic h makes a single physical processor perform multi-tasking function as two logical ones.
IDE Configuration S ATA Controller(s) The optional settings are: [Disabled]; [Enabled]. Configure SAT A as The optional settings are: [IDE]; [AHCI].
USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. Legacy USB Support The optional settings are: [Auto]; [Disabled]; [Enabled].
NCT6627UD Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A desc ription of the selected item appears on the right side of the screen Serial Port Configuration Use this item to set param eters of serial port 0~3.
PC Health Status This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of the screen.
Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub m enus: Host Bridge Host Bridge For items marked with “”, please press for m ore options. South Bridge South Bridge For item s m arked with “”, please press for more options.
M emory Frequency and Timing This item is for m emor y frequency and timing settings. Press to go to the sub menu.
Intel IGD Configuration You can use this screen to select options for the Intel IGD Configuration, and change the value of the selected option. A desc ription of the selected item appears on the r ight s ide of the screen. Press [Enter] to mak e settings for Intel IGD Configuration: IGFX-Boot Type Use this item to set the video device which will be activated during POST. This has no effect if external graphics presents.
Boot Menu The Boot m enu allows users to change boot options of the system . Boot Settings Configuration Setup Prompt Timeout Use this item to set num ber of seconds to wait for setup activation key. Bootup NumLock State Use this item to select the power-on state for the Num Lock.. The optional settings are: [On]; [Off]. GateA20 Active If Upon Request is selected, GA20 can be disabled using BIOS services.
Option ROM Messages Set display mode for option ROM. Configuration options are Force BIOS and Keep Current. Interrupt 19 Capture If this item is enabled, this function makes the option ROM to trap Interrupt 19. Boot Option Priorities These are settings for boot priority. Specify the boot device priority sequence from the available devices. Security Menu The Security menu allows users to change the security settings for the system.
User Password This item indicates whether a user password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. Exit Menu The Save & Exit menu allows users to load system configuration with optim al or failsafe default values. Save Changes and Exit When you have com pleted the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect.
Save Changes and Reset When you have com pleted the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration param eters can tak e effect. Select Save Changes and Res et from the Save & Exit menu and press . Select Yes to save changes and reset. Discard Changes and Reset Select this option to quit Setup without making any permanent changes to the system configuration and reboot the com puter.
CHAPTER 4 DRIVERS INSTALLATION 4.1 System FPC5121 supports W indows7. To facilitate the installation of s ystem driver, please carefully read the instructions in this chapter before start installing. 1. Insert Driver CD and select the “\Drivers”. 2. Select all files and follow the installing pr ocedure.
4.2 Touch Screen The FPC5121 uses the 5-wire analog resistve. There are the specification and driver installation which are listed below. 4.2.1 Specification Touch Screen 5-wire Analog Resistive type Touch Screen Controller PenMount 6000 USB Touch Screen Controller IC Communications USB interface Baud Rate 19200 baud rate fixed Resolution 1024 x 1024 (10 bit A/D converter inside) Power Input 5V Power Consumption Active: 24.6mA / Idle Mode: 13.4mA 4.2.
3. Click Start menu and select “PenMount Utilities”; and then, a “PenMount Control Panel” pops out. 4. Select the “Standard Calibrate” tab.
5. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. 6. Press OK.
4.3 Embedded O.S. The FPC5121 provides the W ES 7. The O.S. is suppor ted devices which are listed below. 4.3.1 WES 7 Here are supported onboard devices: Onboard Multi I/O SATA HDD USB PS2 Keyboard and mouse CRT/LCD display(Default 18bits Resolution 800x600) 10/100/1000 base-T Ethernet Compact Flash Onboard Audio Touch Screen PenM ount Touch screen Before you can use and calibrate it, here is what you should do: 1.
4.3.2 Windows CE.NET 6.0 Here are supported onboard devices: Onboard Multi I/O SATA HDD USB PS2 Keyboard and mouse CRT/LCD display 10/100/1000 base-T Ethernet Compact Flash Onboard Audio Audio Touch Screen Calibration Touch screen In this image we add PenMount Touch drivers and utilities. It is customized for 800 x 600. Calibration: 1. Click “Calibratyion” on desktop to calibrate touch screen. 2.
