FPC 7120 Fanless Touch panel PC User Manual FPC7120: 12” Touch frame panel PC, 800 x 600 with an Intel Atom N270 1.6GHz CPU 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC Copyright Notice This document is copyrighted, 2009. The information provided in this document has been carefully checked for accuracy at the time of publication. No representations or warranties, either expressed or implied, with respect to the content here of and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed “as is”.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC Safety Precautions 1.Before getting started, read these instructions and save them for later reference. 2. Please disconnect this equipment from any AC outlet before cleaning. Clean with a damp or dry cloth only. Do not spray any liquid cleaner directly. 3. The power outlet socket used to plug in the computer power cord must be located near the system and easily accessible. Do not use outlets on the same circuit of the systems that are regularly switched on and off. 4.
FPC 7120 Fanless Touch panel PC Table of Contents Disclaimers ..........................................................................ii Safety Approvals................................................................. iii Safety Precautions..............................................................iv CHAPTER 1 INTRODUCTION ....................................... 1 1.1 General Description ........................................... 1 1.2 Specifications..............................................
FPC 7120 Fanless Touch panel PC 4.4 Connecors and Pin Assignment.........................................16 4.4.1 CN1: Inverter BKL Connector..............................................................17 4.4.2 CN2: 4 Pin Power Output Connector..................................................17 4.4.3 CN3: USB Connectors .......................................................................17 4.4.4 CN4: USB Connectors .......................................................................17 4.4.
FPC 7120 Fanless Touch panel PC CHAPTER 5 AWARD BIOS SETUP...................... 25 5.1 Starting Setup ............................................................................................25 5.2 Award BIOS Setup .....................................................................................26 5.3 Standard CMOS Features .........................................................................27 5.4 Advanced BIOS Features ...................................................................
FPC 7120 Fanless Touch panel PC 6.3.2 Windows VISTA ................................................................................. 57 6.3.3 Windows POSReady 2009 ................................................................59 6.4 Audio Driver Installation.................................................................................60 6.4.1 Windows XP.........................................................................................60 6.4.2 Windows VISTA ......................................
FPC 7120 Fanless Touch panel PC CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the FPC 5104. Chapter 1 includes the following sections: General Description Specification Dimensions 1.1 General Description FPC 7120 series is a fan less mini size panel PC with a compact aluminum chassis as a huge heat sink, which delivers reliable, easy-maintenance, LCD panel and quiet industrial grade mini size computer.
FPC 7120 Fanless Touch panel PC 1.2 Specifications SYSTEM CPU o Onboard Intel Atom N270 processors (1.6GHz/FSB 533MHz) o Main Chipsets: Intel i82945GSE+ICH7M System Memory o 2 x 240 pin DIMM up to 2GB DDR2 Graphics o 945GSE integrated GMA950, share system memory (up to 224MB) o Support dual display mirroring/multiple mode Networking o Realtek RTL8111B 10/100/1000 Base-T fast Ethernet o 802.
FPC 7120 Fanless Touch panel PC 1.2.2 I/O System Resolution o FPC 7120: 800 x 600 Brightness o FPC 7120: 350 cdm2 Storage Device HDD o 1 x 2.5" SATA HDD Compact Flash o 4G or 8G CF card (Optional) I/O PORTS USB o 6 x USB 2.0 ports (4 x rear connectors; 2 x pin header inside) Serial Ports o FPC 7120: - 4 x DB-9 (COM1 / 2 / 3 / 4) - RS232: COM1 / 3 / 4 - RS232/422/485: COM2 - Support pin9 +5V/12V selection by jumper LAN o 2 x RJ-45 interface (Gigabit LAN 10/100/1000) 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC PS/2 o 2 x PS/2 ports (for keyboard and mouse) Audio o 1x line-out and 1x Mic in VGA o 1 x DB15 VGA interface for dual display MECHANICAL & ENVIRONMENTAL Dimension o FPC 7120: 260 x 351 x 86.5 (H x W x D mm) Weight o FPC 7120: 4.5 KG Temperature o Operating: 0~40°C o Storage: -20~60°C Humidity o 10%~90% EMC & Safety o CE, FCC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc.
FPC 7120 Fanless Touch panel PC CHAPTER 2 USING THE SYSTEM 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 2.2 First Time System Setup To set up the FPC 7120 series for the first-time, you should have the following items ready. These items are either included in the accessory box or available from your local computer parts store. o FPC 7120 Utility CD (Included) o Power cord (Included) o PS/2, AT or USB Keyboard (Not included) o PS/2 or USB Mouse (Not included) o USB CD-ROM Drive (Not included) o Operating System (OS) Installation CD (Not included) 2.2.
FPC 7120 Fanless Touch panel PC RAM and compare them to the equipment check conducted during the power on self-test (POST). If any error or mismatch occurs, an error message will be shown on the screen and the computer will be prompted to run the setup program. 2.2.3 Operating System and Driver The standard FPC 7120 series system may not be equipped with an operating system (OS).
FPC 7120 Fanless Touch panel PC 2.3 Installation Memory Module The FPC 5120 series with BI-946ID main board provides two 240-pin DIMM slot. The socket supports up to 2GB DDR2 533MHz. When installing the Memory drvice, please follow the steps below Locate the DIMM slot in the motherboard. 1. 2. 3. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the slot.
FPC 7120 Fanless Touch panel PC CHAPTER 3 INPUT/ OUTPUT CONNECTORS PS/2 Keyboard and PS/2 Mouse The FPC 7120 series provides two connector supports PS/2 interface. In other cases, especially in embedded applications, a mouse is not used. Therefore, the BIOS standard setup menu allows you to select* "All, But Keyboard" under the "Halt On". This allows no-keyboard operation in embedded system applications without the system halting under POST.
FPC 7120 Fanless Touch panel PC Network Interface The Realtek RTL8111B Gigabit Ethernet supports the PCI Express 1.0a bus interface for host communications with power management and is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet. The Ethernet port provides a standard RJ-45 jack. USB Ports Four USB (two is optional) devices may be connected to the system through an adapter cable. Various adapters may come with USB ports.
FPC 7120 Fanless Touch panel PC CHAPTER 4 SYSTEM MAIN BOARD 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC CHAPTER 5 AWARD BIOS SETUP Power on the computer and immediately press to run the AwardBIOS™ CMOS Setup Utility, the setup main menu will appear: The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to move among the items and press to enter the sub-menu. 5.1 Starting Setup Award BIOS™ has a built-in setup program that allows users to modify the basic system configuration.
FPC 7120 Fanless Touch panel PC 5.2 Award BIOS Setup Power on the computer and immediately press to run the AwardBIOS™ CMOS Setup Utility, the setup main menu will appear: The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to move among the items and press to enter the sub-menu. Standard CMOS Setup: This page includes all the items in standard compatible BIOS.
FPC 7120 Fanless Touch panel PC 5.3 Standard CMOS Features The standard CMOS features setup allows users to configure system components such as date, time, hard disk drive, floppy drive and display. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Date (mm : dd : yy) Set the system date. Note that if you are running a Windows OS, this item is automatically updated whenever you make changes to the Windows Date.
FPC 7120 Fanless Touch panel PC >Capacity Note that the disk drive capacity (approx.) is usually slightly greater than the size of a formatted disk given by a disk-checking program. >CYLS. Number of cylinders, Min = 0, Max = 65535 >HEADS Number of read/write heads, Min = 0, Max = 255 >PRECOMP Write precomparition, Min = 0, Max =65535. >LANDZONE Size of landing zone, Min = 0, Max = 65535. >SECTORS Number of sectors per track, Min = 0, Max = 255. Drive A/B Set Drive A/B type choice. Options: None", "360K, 5.
FPC 7120 Fanless Touch panel PC 5.4 Advanced BIOS Features This section allows you to configure your system for basic operation. You can select the system's default speed, boot-up sequence, keyboard operation, shadowing and security.
FPC 7120 Fanless Touch panel PC Virus Warning Allow you to choose the Virus Warning feature for IDE Hard Disk boot sector protection. Enable this item to prevent someone from writing data into this area. Options: Enabled or Disabled Default: Disabled CPU L1 & L2 Cache All processors that can be installed in this motherboard use internal level of L1 cache memory to improve performance. Leave this item at the default value for better performance.
FPC 7120 Fanless Touch panel PC Boot Up Num Lock Status This item defines if the keyboard Num Lock key is active when your system is started. Options: On or Off Default: On Typematic Rate Setting This Enables "Typematic Rate" and "Typematic Delay" functions. Options: Enabled, Disabled Default: Disabled Typematic Rate (Chars/Sec) This item sets the rate (characters/second) at which the system retrieves a signal from a depressed key.
FPC 7120 Fanless Touch panel PC 5.5 Advanced Chipset Features These items define critical timing parameters of the mainboard. You should leave the items at their default values unless you are very familiar with the technical, specifications of the system hardware. If you change the values incorrectly, you may introduce fatal error or recurring instability into your system.
FPC 7120 Fanless Touch panel PC 5.
FPC 7120 Fanless Touch panel PC Super IO Device >Onboard FDC Controller Options: Enabled, Disabled Default: Enabled >Onboard Serial Port 1 Options: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto Default: 3F8/IRQ4 >Onboard Serial Port 2 Options: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto Default: 2F8/IRQ3 >UART Mode Select Options: IrDA, ASKIR, Normal Default: Normal >Onboard Parallel Port Options: Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7 Default: 378/IRQ7 >Parallel Port Mode Options: SPP,
FPC 7120 Fanless Touch panel PC Serial Port 3 Use IRQ Options: IRQ5, IRQ7, IRQ10, IRQ11 Default: IRQ10 Onboard Serial Port 4 This option is used to assign the I/O address and Interrupt Request (IRQ) for the onboard Serial Port. Options: 280, 288, 2A0, 2A8 Default: 288 Serial Port 4 Use IRQ Options: IRQ5, IRQ7, IRQ10, IRQ11 Default: IRQ10 Onboard Serial Port 5 This option is used to assign the I/O address and Interrupt Request (IRQ) for the onboard Serial Port.
FPC 7120 Fanless Touch panel PC USB Device Setting > USB Controller Enable or disable Universal Host Controller Interface for Universal Serial Bus. Options: Enabled, Disabled Default: Enabled > USB 2.0 Controller Enable or disable Enhanced Host Controller Interface for Universal Serial Bus.
FPC 7120 Fanless Touch panel PC 5.7 Power Management Setup ACPI function Options: Disabled, Enabled Default: Enabled ACPI Suspend Type Options: S1 (POS), S3 (STR), S1 & S3 Default: S1 (POS) S1/Power on suspend (POS) is a low power state. In this state, no system context (CPU or chipset) is lost and hardware maintains all system contexts. S3/Suspend to RAM (STR) is a power-down state. In this state, power is supplied only to essential components such as main memory and wakeup-capable devices.
FPC 7120 Fanless Touch panel PC Suspend Mode Options: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, 1 Hour Default: Disabled Video Off Method Options: Blank Screen, V/H SYNC+ Blank, DPMS Support Default: V/H SYNC+ Blank Video Off In Suspend Options: Yes, No Default: Yes Soft-Off by PWR-BTTN System is turned off if power button is pressed for more than four seconds, or Power button functions as a normal power-on/-off button.
FPC 7120 Fanless Touch panel PC 5.8 PnP/PCI Configuration Reset Configuration Data Enabled will reset the ESCD (Extended System Configuration Data) after exiting BIOS Setup if a newly installed PCI card or the system configuration prevents the operating system from loading. This field should usually be left "Disabled". Options: Enabled, Disabled Default: Disabled Resources Controlled By Enables the BIOS to automatically configure all the Plug-and-Play compatible Devices, e.g.
FPC 7120 Fanless Touch panel PC 5.9 Frequency/ Voltage Control Auto Detect PCI Clk Options: Disabled, Enabled Default: Enabled Spread Spectrum When the mainboard's clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. Options: Disabled, Enabled Default: Disabled 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC 5.10 Load Fail-Safe Defaults When you press on this item, you will get confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N)? N Pressing 'Y' loads the BIOS default values for the most stable, minimal performance system opera tions. This option is for restoring all the default fail-safe BIOS settings. These values are set by the mainboard manufacturer to provide a stable system with basic performance. 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC 5.11 Load Optimized Defaults When you press on this item, you will get confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N)? N Pressing 'Y' loads the default values that are factory-set for optimal performance system operation. This option is for restoring all the default optimized BIOS settings. The default optimized values are set by the mainboard manufacturer to provide a stable system with optimized performance. 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC 5.12 Set Supervisor/ User Password Steps to set supervisor/user password are described as follows: New password setting: 1. While pressing to set a password, a dialog box appears to ask you enter a password. 2. Key in a new password. The password cannot exceed eight characters. Please Enter Your Password 3. System will request you to confirm the new password again. Please Confirm Your Password 4. When completed, new code takes effect.
FPC 7120 Fanless Touch panel PC 5.13 Save & Exit Setup Pressing on this item asks for confirmation: Save to CMOS and Exit (Y/N)? Y Press 'Y' stores the selections made in the menus of CMOS - a special section of memory that recorded in after you turn your system off. The next time you turn on your computer, the BIOS configures your system according to the Setup selections recorded in he CMOS memory of the chipset. After saving the values the system is restarted again. 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC 5.14 Exit Without Saving Press on this item asks for confirmation: Quit Without Saving (Y/N)? Y This allows you to exit from Setup without storing in CMOS any change. The previous selections remain in effect. This exits from Setup utility and restarts your computer. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved.
FPC 7120 Fanless Touch panel PC Chapter 6 DRIVERS INSTALLATION This chapter offers information of software drivers' installation. 6.1 Chipset Driver Installation The FPC 7120 series chipset Drivers should be installed first before the software drivers to enable Plug & Play INF support for FPC 7120 series chipset components. Follow the instructions below to complete the installation. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 6.2 Ethernet Driver Installation The FPC 7120 series is equipped with the Realtek RTL8111B Ethernet controller combines a triplespeed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixedmode signal technology, it offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 6.3 VGA Driver Installation The FPC 7120 series offers an integrated VGA/LCD Controller, 2D/3D GUI engine, sharing memory architecture up to 64 MB. The specifications and features are described as follows: The FPC 7120 series supports CRT and TFT LCD displays. In addition, it also supports CRT and flat panel display mode simultaneously. The FPC 7120 series can be set in one of three configurations: on a CRT, on a flat panel display, or on both simultaneously.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 6.4 Audio Driver Installation The FPC 7120 series is equipped with the VIA HD Codec VT1708A, which is delivering top quality audio performance, supporting the latest 8-channel, 24-bit,192KHz audio content for an all-round high fidelity experience. Integrating stereo DACs with a 100dB S/N ratio and compliant with the Intel® High Definition Audio Rev.1.0 specification. Follow the installation steps for Windows XP/VISTA/POSReady2009. 661 Brea Canyon Rd.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 6.5 Wireless LAN Installation The Users must make sure which operating system you are using in the FPC 7120 series before installing the Wireless LAN drivers. Follow the steps below to complete the installation. You will quickly complete the installation. Follow the installation steps for Windows XP/VISTA/POSReady 2009. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved.
FPC 7120 Fanless Touch panel PC 6.6 Touch Driver Installation The FPC 7120 series supports HIGGSTEC Touch. The touchscreen systems consist of a touchscreen and an electronic touchscreen controller. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 7120 Fanless Touch panel PC 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
