User Manual

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

KP802/1602

1U Rackmount Combo IP KVM Switch

< 1.4 > IP console setting

After the cable connection, please take the following steps to configure the IP KVM :

1. Download IPKVMsetup.exe

2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as belo w.

3. Click Refresh Device to search the connected IP KVM

4. Select the M.A.C. address, which you want to setup, then click Query Device

5. Enter Super user login. The default is super

6. Enter Super user password. The default is pass

7. Enter the new super user password

8. Re-enter the new password

9. Change the desired IP address / Subnet mask / Gatewa y, then click Setup Device to confirm the setting to IP KVM

10. The default address is as below: --

¦ The single IP KVM model, such as KP1602 - http://192.168.1.22

11. Open Internet Explorer ( I.E. ), version 6.0 or above

12. Enter the IP KVM address into the address bar

- For Single IP - http://192.168.1.22

13. Enter username ( default is super )

Password ( default is pass )

14. After successful login to IP KVM, the user will enter the main page of IP KVM