KVS802/1602 1U Rackmount USB Hub KVM Switch User Manual KVS802/1602: 1U rackmount USB hub KVM switch 8/16-port with 2 user console 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
KVS802/1602 1U Rackmount USB Hub KVM Switch Le ga l Informa tion First En glish p rinting , October 2 002 In form ation in this docum ent has be en ca re fully che cked for accuracy; ho wever, no g uara ntee is g iven to th e correctne ss o f th e con ten ts. The info rmation in this docu men t is sub je ct to cha nge withou t no tice. W e are n ot lia ble fo r any inju ry o r lo ss th at results from the use o f th is eq uip men t.
KVS802/1602 1U Rackmount USB Hub KVM Switch Contents < Part 1 > USB Hub 2-console KVM KVS802 1.1 1.2 1.3 1.4 1.5 < Part 2 > 2.1 2.2 2.3 2.4 2.5 KVS1602 Package contents KVM port connection Remote & Local console connection Built-in USB hub usage & connection Specifications P.1 P.2 P.2 - 3 P.4 P.5 Usage KVM Button Password KVM OSD KVM Hotkey & Remote Console Hotkey DC power 12V, 24V, 48V Input P.6 P.7 P.8 P.9 P.10 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.
KVS802/1602 1U Rackmount USB Hub KVM Switch Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
KVS802/1602 1U Rackmount USB Hub KVM Switch Part 1. USB Hub 2-console KVM < 1.1 > Package Contents KVS802 / KVS1602 KVM unit • KVS802 or KVS1602 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 • Receiver box for remote console x 1 • Power adapter w/ power cord ( for receiver ) x 1 • 6ft Combo KVM cable for receiver box x 1 KVS802 Local Console 8 Remot e 7 6 5 4 3 2 1 12VDC 2 x USB 2.
< 1.2 > KVM port connection CB-6 / CB-10 / CB-15 ¦ 6 / 10 / 15 ft USB KVM cable ¦ Support USB server USB Servers USB KVM port 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 USB KVM cable support USB server USB Servers < 1.3 > Remote & Local console connection Local USB console 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Remote Cat6 Console CAT 5 / 6 cable max.
How to use a receiver to connect a remote console Receiver Local Computer Monitor Remote I/O Front Rear Power USB K/B Local Button to PC Mouse Remote Button to KVM switch The receiver provides a hotkey function for remote console.
KVS802/1602 1U Rackmount USB Hub KVM Switch < 1.4 > Built-in USB Hub Usage & Connection 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2 x USB 2.0 ( USB hub for device connection ) Flash Disk Hard disk storage Keyboard / Mouse Scanner Printer Camera 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
< 1.
KVS802/1602 1U Rackmount USB Hub KVM Switch Part 2. Usage 2.1 KVM Button Power ON ¦ Turn off all servers and KVM switches ¦ Make sure all cables / c onnectors are properly connected ¦ Recomm end Power ON sequence is m onitor, KVM switch finally computer Front Panel - Port LED Indications 8 ports Bank no. PC port LEDs Channel button Bank button 16 ports Bank no.
2.2 Password The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ¦ Enable password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0” on number pad) 4.
2.
2.4 KVM Hotkey & Remote Console Hotkey Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Bank no. + Port no.
KVS802/1602 1U Rackmount USB Hub KVM Switch 2.5 DC Power 12V, 24V, 48V Input Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% Input rating Input current Output rating Remarks: ¦ Package does not include power cord 14628 Central Ave, Chino, CA 91710 tel:909.597.
