PC 5153 15” Industrial wireless Panel PC User Manual PC 5153: 15” Industrial Panel PC with Core 2 Quad/Duo processor PC 5173: 17” Industrial Panel PC with Core 2 Quad/Duo processor 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PC 5153 15” Industrial wireless Panel PC Table of Contents CHAPTER 1 INTRODUCTION 1.1 GENERAL OVERVIEW .................................................................................................... 2 1.1.1 MODEL VARIATIONS ........................................................................................ .2 1.1.2 APPLICATIONS ...................................................................................................3 1.1.3 FEATURES .......................................................
PC 5153 15” Industrial wireless Panel PC 2.6.2 Touch Screen .................................................................................................... 24 2.7 POWER SUPPLY ........................................................................................................... 25 2.7.1 AC INPUT/ DC INPUT SPECIFICATIONS ......................................................25 2.8 EXPANSION SLOTS.......................................................................................................
PC 5153 15” Industrial wireless Panel PC 4.8 PCIE EXPANSION CARD INSTALLATION (OPTIONAL) ................................................ 51 4.9 AT/ATX MODE SELECTION ............................................................................................. 53 4.10 ACTIVATING THE FRONT USB CONNECTORS (WIDS SERIES ONLY) .................... 53 4.11 MOUNTING THE SYSTEM ............................................................................................... 55 4.11.1 WALL MOUNTING ..................
PC 5153 15” Industrial wireless Panel PC 5.6 SECURITY ...................................................................................................................... 100 5.7 CHIPSET ........................................................................................................................ 101 5.7.1 North Bridge Configuration.............................................................................. 102 5.7.1.1 Video Function Configuration .............................................
PC 5153 15” Industrial wireless Panel PC D. HAZARDOUS MATERIALS DISCLOSURE D.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ......................................152 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5153 15” Industrial wireless Panel PC CHAPTER 1 INTRODUCTION 1.1 OVERVIEW The PC5153/ PC5173 flat panel PC is for industrial environments like production lines and machine automation. The PC5153/ PC5173 provides all the features of a PC, combined with a touch panel screen for mouse and keyboard free data input. The PC5153/ PC5173 provides wired networking for integration into company networks and PC5153/ PC5173 also provides wireless network via PIFA antenna on the front panel.
PC 5153 15” Industrial wireless Panel PC 1.1.1 MODEL VARIATIONS 15” PC 5153 CPU: 2.2GHz Intel Celeron E1500 Power: AC input, 18~36V DC input 17” PC 5173 CPU: 2.2GHz Intel Celeron E1500 Power: AC input, 18~36V DC input 1.1.2 APPLICATIONS The PC5153/ PC5173 flat panel PC is designed for rigorous industrial environments where it may be exposed to both heat and moisture. Its durability and strength also makes it an ideal choice for public access computers.
PC 5153 15” Industrial wireless Panel PC ƒ Dual DDR3 memory DIMM (system max. 4 GB SDRAM) ƒ SATA connectors ƒ High brightness industrial grade LCD panel ƒ The following I/O ports o Five COM (one RS-232/422/485) o One CompactFlash® slot o One VGA port o One Parallel port o USB 2.0 ports ƒ Dual 10/100/Gigabit Ethernet supported ƒ RoHS compliant 1.2 EXTERNAL OVERVIEW The PC5153/ PC5173 flat panel PC is comprised of an LCD screen, aluminum front panel and heavy duty steel rear and side panels.
PC 5153 15” Industrial wireless Panel PC 1.2.2 REAR PANEL The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-4. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC 1.2.3 TOP PANEL The top panel has three sets of mounting clamp slot, fan vents and retention screws for securing the drive bay bracket. The retention screws are circled in Figure 1-5 below. 1.2.
PC 5153 15” Industrial wireless Panel PC ƒ 3 x Audio jacks ƒ 1 x VGA connector ƒ 1 x CompactFlash® slot ƒ 1 x AT/ATX switch ƒ 1 x USB switch 1.2.5 LEFT PANEL The left side panel hosts three cooling fans that cool the interior of the system (Figure 1-7). 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5153 15” Industrial wireless Panel PC 1.2.6 RIGHT PANEL The right panel has a CD-ROM drive bay for CD-ROM drive installation (Figure 1-8). 1.3 INTERNAL OVERVIEW The PC5153/ PC5173 internal components are configured in three levels. The PSU cover bracket to the left (Figure 1-9) supports the hard drive and optical drive brackets. Below the PSU cover bracket is the power supply. On the same level as the power supply is the motherboard. Below the motherboard and PSU level is an LCD panel.
PC 5153 15” Industrial wireless Panel PC CHAPTER 2 SPECIFICATIONS 2.1 INTRODUCTION The PC5153/ PC5173 flat panel PC has the following preinstalled components: ƒ 1 x Motherboard ƒ 1 x TFT LCD screen ƒ 1 x Power supply ƒ 2 x Cooling fans The technical specifications for these components and the system are shown in the sections below. 2.1.1 SYSTEM SPECIFICATIONS PC5153 PC5173 LCD Specs.
PC 5153 15” Industrial wireless Panel PC Memory: Two 2.0 GB 800/1066 MHz DDR3 SDRAM DIMM (system max. 4.0 GB) Solid State Drive (SSD): One CompactFlash® Type II socket Drive Bay: One 2.5" SATA 3Gb/s or IDE anti-shock drive bay, One slim type CD-ROM bay Ethernet: Two PCIe GbE controllers Audio: RealTek ALC888 HD audio codec I/O ports: 1 x RS-232/422/485 2 x LAN connectors 4 x RS-232 3 x Audio connectors (line-in, line-out and mic-in) 6 x USB 2.
PC 5153 15” Industrial wireless Panel PC Expansion Slots: Optional riser card: One PCI slot or One PCIe x4 with PCIe x1 signal Chassis Construction: Heavy-duty steel Front Panel Construction: Aluminum Operating Temperature: -10ºC ~ 50ºC Storage Temperature: -20ºC ~ 60ºC Vibration: 5 Hz ~ 17 Hz 0.1" double amplitude displacement 17 Hz ~ 640 Hz 1.5G acceleration peak-to-peak Shock: 10G acceleration peak-to-peak (11 ms) Net/Gross Weight: 7 kg/11 kg 8 kg/12 kg Dimensions (W x H x D): 410 x 309 x 110.
PC 5153 15” Industrial wireless Panel PC 2.2 DIMENSION The dimensions of the PC5153/ PC5173 are shown in the sections below. 2.2.1 PC5153 DIMENSIONS The dimensions of the PC5153 flat panel PC are shown below. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC 2.2.2 PC5173 DIMENSIONS The dimensions of the PC5173 flat panel PC are shown below. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC 2.3 GRAPHICS SUPPORT The Intel® G41 chipset has an integrated graphics engine, Intel® Graphics Media Accelerator X4500 that supports analog CRT display devices. The VGA port on the external peripheral interface connector panel connects a peripheral monitor to the PC5153/ PC5173 system. 2.4 MEMORY All processors supported by the PC5153/ PC5173 have their own internal DDR3 memory controller.
PC 5153 15” Industrial wireless Panel PC 2.5 STORAGE There following storage options are available: CompactFlash® SATA hard drive 2.5.1 COMPACTFLASH The CompactFlash® socket supports standard CompactFlash® Type II cards. The chipset flash interface is multiplexed with an IDE interface and can be connected to an array of industry standard NAND Flash or NOR Flash devices. The CompactFlash® slot location is shown below. 2.5.2 HARD DRIVE The PC5153/ PC5173 comes has a single drive bay for 2.
PC 5153 15” Industrial wireless Panel PC 2.6 FRONT PANEL The front panel of the PC5153/ PC5173 consists of an LCD monitor and a touch screen panel. 2.6.1 FLAT SCREEN The PC5153/ PC5173 comes with a TFT LCD monitor. The tough construction of the TFT monitor allows the PC5153/ PC5173 to withstand the conditions it is likely to be exposed to during regular use. Some of the specifications of the TFT monitors are shown below: ƒ ƒ ƒ ƒ Pixel pitch of 0.
PC 5153 15” Industrial wireless Panel PC 2.7.1.1 AC INPUT/ DC INPUT SPECIFICATIONS There are three connector for two kinds of expansion modules, Type A module and Type B module. Slot 1 and Slot 2 are for installing Type A module and Slot 3 is for Type B module. The pinouts of these slots are listed below. 2.8 EXPANSION SLOTS The riser card with either a PCI or PCIe x1 expansion card slot can be separately purchased and installed in the PC5153/ PC5173.
PC 5153 15” Industrial wireless Panel PC 2.9 WIRELESS LAN The PC5153/ PC5173 panel PC preinstalled an 802.11 b/g/n wireless LAN (WLAN) module in the Mini-PCIe socket and interfaced to the Intel® ICH7 through the PCIe x1 bus. The wireless module is then connected directly to the front panel PIFA antenna. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC CHAPTER 3 UNPACKING 3.1 ANTI-STATIC PRECAUTIONS WARNING! Failure to take ESD precautions during the installation of the PC5153/ PC5173 may result in permanent damage to the PC5153/ PC5173 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PC5153/ PC5173. Dry climates are especially susceptible to ESD.
PC 5153 15” Industrial wireless Panel PC CHAPTER 4 INSTALLATION AND CONFIGURATION 4.1 INSTALLATION PRECAUTIONS When installing the PC5153/ PC5173, please follow the precautions listed below: ƒ Turn power off: When installing the PC5153/ PC5173 make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system. ƒ Certified Engineers: Only certified engineers should install and modify on-board functions. ƒ Mounting: The PC5153/ PC5173 is a heavy device.
PC 5153 15” Industrial wireless Panel PC Removal and reinstallation of some of the components are described in Chapter 4. 4.3 INSTALLATION AND CONFIGURATION STEPS The following installation steps must be followed. Step Step Step Step Step Step 1: 2: 3: 4: 5: 6: Unpack the PC5153/ PC5173. Set the jumper settings. Install HDD, CompactFlash® and CD drive. Mount the PC5153/ PC5173 flat panel PC. Connect peripheral devices to the bottom panel of the PC5153/ PC5173. Configure the system. 4.
PC 5153 15” Industrial wireless Panel PC 4.5 JUMPER SETTINGS NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper. The following jumpers can be found on the motherboard installed in the PC5153/ PC5173.
PC 5153 15” Industrial wireless Panel PC 4.5.2 PRECONFIGURED JUMPERS WARNING: Do not change the settings on the jumpers in described here. Doing so may disable or damage the system The following jumpers are preconfigured for the PC5153/ PC5173. Users should no change these jumpers. 4.5.
PC 5153 15” Industrial wireless Panel PC 4.5.4 COM1 TO COM5 PIN 9 SELECT Jumper Label: J_COM_V1, J_COM_V2, J_COM_V3, J_COM_V4 and J_COM_V5 Jumper Type: 6-pin header Jumper Settings:See Table 4-4 Jumper Location: See Figure 4-3 Four jumpers configure pin 9 on the COM1, COM2, COM3 COM4 and COM5 connectors. Pin 9 on these connectors can be set as either +5 V, +12 V or as the ring (RI) signal. The COM1, COM2, COM3, COM4 and COM5 Pin 9 Setting jumper selection options are shown in Table 4-4.
PC 5153 15” Industrial wireless Panel PC The COM1 to COM5 Pin 9 Setting jumper locations are shown in Figure 4-3 below. 4.5.5 COM5 RS-232/422/485 SERIAL PORT SELECT JUMPER Jumper Label: UART_SEL1 and UART_SEL2 Jumper Type: 12-pin header and 8-pin header Jumper Settings:See Table 4-5 Jumper Location: See Figure 4-4 The COM5 RS-232/422/485 Serial Port Select jumper sets the communication protocol used by the second serial communications port (COM5) as RS-232, RS-422 or RS485.
PC 5153 15” Industrial wireless Panel PC 4.5.5.1 COM5 RS-422 PINOUTS The pinouts for RS-422 and RS-485 operation of external serial port COM 5 are detailed below. 4.6 DRIVE INSTALLATION The drive installation process is shown in the sections below. 4.6.1 HARD DRIVE INSTALLATION To install a HDD, please follow the steps below: Step 1: Remove the back cover (Section 4.4). Step 2: The HDD bracket is attached to the elevated platform by four retention screws.
PC 5153 15” Industrial wireless Panel PC Step 3: Attach the SATA connector cable to the bracket. Step 4: Attach the hard drive in the bracket. To do this, slide the hard drive onto the bracket until it connects with the SATA connector at the back. Fasten the four retention screws on the side. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5153 15” Industrial wireless Panel PC Step 5: Install the hard drive bracket (with hard drive and SATA cable attached) into the PC5153/ PC5173 and fasten the four hard drive bracket screws. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC 4.6.2 COMPACTFLASH INSTALLATION To install the CompactFlash® card, please follow the steps below: Step 1: Undo the CompactFlash® slot cover screw and remove the CompactFlash® cover plate. Step 2: Insert the CompactFlash® card into the slot. Step 3: Fasten the CompactFlash® cover plate. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC 4.6.3 CD DRIVE INSTALLATION To install a CD drive, please follow the steps below. Step 1: Remove the back cover (Section 4.4). Step 2: Attach the CD drive adapter to the CD-ROM if it is an IDE drive (if it is a SATA drive, proceed to Step 5:). Attach a CD drive adapter to a CD drive by aligning the two retention screw holes in the CD drive adapter with the retention screw holes on the rear side of the CD drive.
PC 5153 15” Industrial wireless Panel PC Step 6: Remove the four screws from the optical drive bracket assembly. Remove the blank drive plate. Step 7: Install the optical drive in the same position as the previously removed blank optical drive plate. Fasten the same four screws to attach the optical drive to the bracket. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC Step 8: Attach the SATA cable to the back of the optical drive and fasten the SATA cable screws. Step 9: Reinstall the optical drive bracket into the PC5153/ PC5173 and fasten the optical bracket screws. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5153 15” Industrial wireless Panel PC 4.7 PCI Expansion Card Installation (Optional) To install a PCI expansion card, please do the following. Step 1: Remove the back panel. See Section 4.4. Step 2: Install the PCI riser card. Insert the PCI riser card into the PCI slot on the motherboard of the system. Secure the PCI riser card to the system with two retention screws. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC Step 3: Remove the expansion slot cover. The expansion slot on the I/O panel interface is secured to the system with a single retention screw. Remove the screw. Step 4: Insert the expansion card. Align the PCI expansion card edge connector with the PCI expansion slot on the PCI riser card. Gently insert the PCI card into the PCI expansion slot. Step 5: Secure the expansion card.
PC 5153 15” Industrial wireless Panel PC 4.8 PCIe Expansion Card Installation (Optional) To install a PCI expansion card, please do the following. Step 1: Remove the back panel. See Section 4.4. Step 2: Install the PCIe riser card. Insert the PCIe riser card into the PCI slot and PCIe x4 slot on the motherboard of the system. Secure the PCIe riser card to the system with two retention screws. Step 3: Remove the expansion slot cover.
PC 5153 15” Industrial wireless Panel PC Step 4: Insert the expansion card. Align the PCIe expansion card edge connector with the PCIe expansion slot on the PCIe riser card. Gently insert the PCIe card into the PCIe expansion slot. Step 5: Secure the expansion card. Once the PCIe card is correctly installed in the system, reinsert the previously removed retention screw to secure the card to the I/O interface panel. 4.
PC 5153 15” Industrial wireless Panel PC 4.10 Activating the Front USB Connectors A USB switch on the I/O panel of the PC5153/ PC5173 activates the two USB connectors on the front panel. To access the USB connectors and activate the connectors, please do the following: Step 1: Open the cover. The USB connectors are secured to the front panel of the PC5153/ PC5173 with two retention screws. Remove these screws. Step 2: Activate the USB connectors.
PC 5153 15” Industrial wireless Panel PC 4.11 MOUNTING THE SYSTEM WARNING! When mounting the PC5153/ PC5173 flat panel PC onto an arm, wall or into a panel, it is advisable to have more than one person help with the installation to prevent accidental damage to the panel and avoid personal injury. The ƒ ƒ ƒ ƒ methods of mounting the PC5153/ PC5173 are: Wall mounting Panel mounting Arm mounting Rack mounting The mounting methods are fully described below. 4.11.
PC 5153 15” Industrial wireless Panel PC Step 4: Align the wall-mounting bracket screw holes with the pilot holes. Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (see Figure 3-11). Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the four screw holes on the real panel of the monitor and tighten until the screw shank is secured against the rear panel (see Figure 3-12).
PC 5153 15” Industrial wireless Panel PC Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark the location of the wall-mounting kit screw holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the wall-mounting kit to the wall by inserting a retention screw into the pilot hole on the wall (Figure 4-30).
PC 5153 15” Industrial wireless Panel PC Step 3: Slide the PC5153/ PC5173 through the hole until the metal frame is flush against the panel. Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of the PC5153/ PC5173, behind the metal frame (Figure 4-36). Refer to the mounting kit packing list for the required number of mounting clamps. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC Step 5: Tighten the screws that pass through the panel mounting clamps until the plastic caps at the front of all the screws are firmly secured to the panel (Figure 4-37). 4.11.3 Rack and Cabinet Installation To mount the PC5153/ PC5173 into a rack/cabinet, please follow the steps below. Step 1: Secure the rack mounting bracket to two sides of the monitor using the supplied retention screws (Figure 3-17). Each bracket requires four screws.
PC 5153 15” Industrial wireless Panel PC 4.11.4 Arm Mounting The PC5153/ PC5173 is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 100 mm interface pad. To mount the PC5153/ PC5173 on an arm, please follow the steps below. Step 1: The arm is a separately purchased item. Please correctly mount the arm onto the surface it uses as a base. To do this, refer to the installation documentation that came with the mounting arm.
PC 5153 15” Industrial wireless Panel PC CHAPTER 5 BIOS SETUP 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2.
PC 5153 15” Industrial wireless Panel PC 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 5.1.4 Unable to Reboot After Configuration Changes If the computer cannot boot after changes to the system configuration is made, CMOS defaults. Use the jumper described in Chapter 5. 5.1.
PC 5153 15” Industrial wireless Panel PC 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
PC 5153 15” Industrial wireless Panel PC -System Memory: Displays the auto-detected system memory. o Size: Lists memory size The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. 5.
PC 5153 15” Industrial wireless Panel PC 5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the CPU manufacturer Brand String: Lists the brand name of the CPU being used Frequency: Lists the CPU processing speed FSB Speed: Lists the FSB speed Cache L1: Lists the CPU L1 cache size Cache L2: Lists the CPU L2 cache size 5.3.
PC 5153 15” Industrial wireless Panel PC ATA/IDE Configurations [Compatible] Use the ATA/IDE Configurations option to configure the ATA/IDE controller. Disabled Compatible Disables the on-board ATA/IDE controller. Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode sup ports up to 4 storage devices. Enhanced (DEFAULT) Configures the on-board ATA/IDE controller to be in Enhanced mode.
PC 5153 15” Industrial wireless Panel PC IDE Master and IDE Slave When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the status of the auto detected IDE devices. The following IDE devices are detected and are shown in the IDE Configuration menu: Primary IDE Master Third IDE Master Primary IDE Slave Third IDE Slave Secondary IDE Master Secondary IDE Slave The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the IDE devices installed in the system.
PC 5153 15” Industrial wireless Panel PC Auto-Detected Drive Parameters The "grayed-out" items in the left frame are IDE disk drive parameters automatically detected from the firmware of the selected IDE disk drive. The drive parameters are listed as follows: -Device: Lists the device type (e.g. hard disk, CD-ROM etc.) -Type: Indicates the type of devices a user can manually select -Vendor: Lists the device manufacturer -Size: List the storage capacity of the device.
PC 5153 15” Industrial wireless Panel PC Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB. Disabled BIOS is prevented from using the LBA mode control on the specified channel. Auto DEFAULT BIOS auto detects the LBA mode control on the specified channel.
PC 5153 15” Industrial wireless Panel PC DMA Mode [Auto] Use the DMA Mode BIOS selection to adjust the DMA mode options. Auto DEFAULT BIOS auto detects the DMA mode. Use this value if the IDE disk drive support cannot be determined. S.M.A.R.T [Auto] Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
PC 5153 15” Industrial wireless Panel PC 5.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Parallel Port Address [Disabled] Use the Parallel Port Address option to select the parallel port base address.
PC 5153 15” Industrial wireless Panel PC Normal DEFAULT The normal parallel port mode is the standard mode for parallel port operation. Bi-directional Parallel port outputs are 8-bits long. Inputs are accomplished by reading 4 of the 8 bits on the status register. EPP The parallel port operates in the enhanced parallel port mode (EPP).
PC 5153 15” Industrial wireless Panel PC Normal IrDA ASK IR DEFAULT Serial Port 1 mode is normal Serial Port 1 mode is IrDA Serial Port 1 mode is ASK IR Serial Port2 Address [2F8/IRQ3] Use the Serial Port2 Address option to select the Serial Port 2 base address.
PC 5153 15” Industrial wireless Panel PC Serial Port4 Address [2E8] Use the Serial Port4 IRQ option to select the interrupt address for serial port 4.
PC 5153 15” Industrial wireless Panel PC 2D8 2D0 Serial Port 6 I/O port address is 2D8 Serial Port 6 I/O port address is 2D0 Serial Port6 IRQ [IRQ10] Use the Serial Port6 IRQ option to select the Serial Port 6 interrupt address. IRQ10 DEFAULT IRQ10 is assigned as the Serial Port 6 interrupt address IRQ11 IRQ11 is assigned as the Serial Port 6 interrupt address 5.3.
PC 5153 15” Industrial wireless Panel PC Temp. Limit of OFF [000] WARNING: CPU failure can result if this value is set too high The fan will turn off if the temperature falls below this value. ƒ Minimum Value: 0°C ƒ Maximum Value: 127°C Temp. Limit of Start [020] WARNING: CPU failure can result if this value is set too high When the fan is off, it will only start when the temperature exceeds this setting.
PC 5153 15” Industrial wireless Panel PC Hardware Health Monitoring The following system parameters and values are shown. The system parameters that are monitored are: ƒ System Temperatures: o System Temperature #1 o System Temperature #2 o System Temperature #3 ƒ Fan Speeds: o SYS_FAN1 Speed o SYS_FAN2 Speed o SYS_FAN3 Speed ƒ Voltages: o CPU_Core o 1.125V o 3.3V o 5V o 12V o 1.5V DDR3 o 1.5V o 5V Dual o VBAT 5.3.
PC 5153 15” Industrial wireless Panel PC 5.3.5.1 ACPI SETTINGS Use the General ACPI Settings menu (BIOS Menu 9) to select the ACPI state when the system is suspended. Suspend Mode [S1(POS)] Use the Suspend Mode option to specify the sleep state the system enters when it is not being used. S1 (POS) DEFAULT The system enters S1 (POS) sleep state. The system appears off. The CPU is stopped; RAM is refreshed; the system is running in a low power mode. S3 (STR) 5.3.5.
PC 5153 15” Industrial wireless Panel PC Restore on AC Power Loss [Last State] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system. Power Off The system remains turned off Power On The system turns on Last State DEFAULT The system returns to its previous state. If it was on, it turns itself on. If it was off, it remains off.
PC 5153 15” Industrial wireless Panel PC Resume On RTC Alarm [Disabled] Use the Resume On RTC Alarm option to specify the time the system should be roused from a suspended state. Disabled DEFAULT The real time clock (RTC) cannot generate a wake event Enabled If selected, the following appears with values that can be selected: RTC Alarm Date (Days) System Time After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.
PC 5153 15” Industrial wireless Panel PC Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system. Disabled DEFAULT Remote access is disabled. Enabled Remote access configuration options shown below appear: -Serial Port Number -Serial Port Mode -Flow Control -Redirection after BIOS POST -Terminal Type -VT-UTF8 Combo Key Support These configuration options are discussed below.
PC 5153 15” Industrial wireless Panel PC Terminal Type [ANSI] Use the Terminal Type BIOS option to specify the remote terminal type. ANSI DEFAULT The target terminal type is ANSI VT100 The target terminal type is VT100 VT-UTF8 The target terminal type is VT-UTF8 5.3.7 USB Configuration Use the USB Configuration menu (BIOS Menu 12) to read USB configuration information and configure the USB settings. USB Configuration The USB Configuration field shows the system USB configuration.
PC 5153 15” Industrial wireless Panel PC USB2.0 Controller Mode [Hi Speed] Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller. FullSpeed The controller is capable of operating at 12 Mb/s HiSpeed DEFAULT The controller is capable of operating at 480 Mb/s 5.4 PCI/PnP Use the PCI/PnP menu (BIOS Menu 13) to configure advanced PCI and PnP settings. WARNING: Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction.
PC 5153 15” Industrial wireless Panel PC Available IRQ addresses are: IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device.
PC 5153 15” Industrial wireless Panel PC 5.5 Boot Use the Boot menu (BIOS Menu 14) to configure system boot options. 5.5.1 Boot Settings Configuration Use the Boot Settings Configuration menu (BIOS Menu 14) to configure advanced system boot options. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5153 15” Industrial wireless Panel PC Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. Disabled No POST procedures are skipped Enabled DEFAULT Some POST procedures are skipped to decrease the system boot time Quiet Boot [Disabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.
PC 5153 15” Industrial wireless Panel PC 5.6 Security Use the Security menu (BIOS Menu 17) to set system and user passwords. Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change Supervisor Password.
PC 5153 15” Industrial wireless Panel PC 5.7 Chipset Settings Use the Advanced Chipset Settings menu (BIOS Menu 22) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. 5.7.1 North Bridge Chipset Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 25) to configure the Northbridge chipset.
PC 5153 15” Industrial wireless Panel PC Initiate Graphic Adapter Use the Initiate Graphic Adapter option to select the graphics controller used as the primary boot device. Select either an integrated graphics controller (IGD) or a combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
PC 5153 15” Industrial wireless Panel PC 5.7.1.1 VIDEO FUNCTION CONFIGURATION Use the Video Function Configuration menu to configure the video device connected to the system. 5.7.2 SouthBridge Configuration Use the Southbridge Configuration menu (BIOS Menu 26) to configure the Southbridge chipset. Audio Controller [Auto] Use the Audio Controller option to enable the audio controller.
PC 5153 15” Industrial wireless Panel PC 5.8 Exit Use the Exit menu (BIOS Menu 21) to load default BIOS values, optimal failsafe values and to save configuration changes. Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.
PC 5153 15” Industrial wireless Panel PC CHAPTER 5 SYSTEM MAINTENANCE 5.1 SYSTEM MAINTENANCE INTRODUCTION The following system components may require maintenance. ƒ ƒ ƒ ƒ Motherboard DIMM module PSU module Cooling fans If these components fail, they must be replaced. Please contact the system reseller or vendor to purchase replacement parts. Replacement instructions for the above listed components are described below. 5.2 MOTHERBOARD REPLACEMENT A user cannot replace a motherboard.
PC 5153 15” Industrial wireless Panel PC 6.4 DIMM REPLACEMENT Please read the warnings at the beginning of the previous section before attempting to access any PC5153/ PC5173 internal components. To install/replace the DIMM modules please follow the steps below. Step 1: Remove the back cover (Section 4.4). Step 2: Locate the DIMM socket on the motherboard near the right of the chassis. Push down on the white levers of the socket until the DIMM module disengages from the socket (Figure 6-1).
PC 5153 15” Industrial wireless Panel PC 6.6 PSU MODULE REPLACEMENT Please read the warnings at the beginning of Section 4.3 before attempting to access any PC5153/ PC5173 internal components. If the PSU module has been damaged it must be replaced. To replace the PSU module, please follow the steps below. 6.6.1 Remove the Old PSU Step 1: Remove the back cover (Section 4.4). Step 2: Detach and remove the elevated platform (Section 6.5).
PC 5153 15” Industrial wireless Panel PC Step 5: Remove the retention screws that connect the PSU bracket to the chassis (Figure 6-8). Step 6: Remove the retention screws that connect the PSU to the PSU bracket. 6.6.2 INSTALL THE NEW PSU Installation is done in the reverse order to removal. To install a new PSU module, please follow the steps below. Step 1: Attach the PSU bracket to the PSU module with the previously removed retention screws.
PC 5153 15” Industrial wireless Panel PC 6.7.1 REMOVE THE OLD SYSTEM COOLING FANS Step 1: Remove the back cover (Section 4.4). Step 2: Detach and remove the elevated platform (Section 6.5). Step 3: Disconnect the system cooling fans from the motherboard (Figure 6-9). Step 4: Remove the system cooling fans retention screws from the left panel (Figure 6-10). Step 5: Remove the system cooling fans from the chassis. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.
PC 5153 15” Industrial wireless Panel PC 6.7.2 INSTALL THE NEW SYSTEM COOLING FANS To install the new system cooling fans, please follow the steps below. Step 1: Insert the system cooling fans into the chassis and attach to the left panel with the previously removed retention screws. Step 2: Rebundle the new fan wires and tie them to the chassis like the old fan wires. Step 3: Reconnect the new fan connector to the motherboard. Step 4: Reattach the elevated platform. Step 5: Replace the back cover.
PC 5153 15” Industrial wireless Panel PC A. BIOS OPTIONS Below is a list of BIOS configuration options in the BIOS chapter. ? System Overview .................................................................................................................69 ? System Time [xx:xx:xx] .......................................................................................................70 ? System Date [xx/xx/xx] .................................................................................................
PC 5153 15” Industrial wireless Panel PC ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Start PWM [070]....................................................................................................................84 Slope PWM [1 PWM] ............................................................................................................84 CPU Fan PWM Control [070] ...............................................................................................
PC 5153 15” Industrial wireless Panel PC ? ? ? ? ? ? ? ? ? Initiate Graphic Adapter ................................................................................................... 103 IGD Graphics Mode Select [Enable, 32 MB] ................................................................... 103 Audio Controller [Auto] .................................................................................................... 105 Spread Spectrum [Disabled]......................................................
PC 5153 15” Industrial wireless Panel PC B. DIGITAL I/O INTERFACE B.1 INTRODUCTION The DIO connector on the PC5153/ PC5173 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
PC 5153 15” Industrial wireless Panel PC B.3.2 ENABLE THE DIO OUTPUT FUNCTION The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below. MOV AX, 6F09H Sets the digital port as output MOV BL, 09H INT 15H Initiates the INT 15H BIOS call 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC C. WATCHDOG TIMER NOTE: The following discussion applies to DOS environment. Acnodes support is contacted or the Acnodes website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
PC 5153 15” Industrial wireless Panel PC Example program: ; INITIAL TIMER PERIOD COUNTER ; W_LOOP: MOV AX, 6F02H ;setting the time-out value MOV BL, 30 INT ;time-out value is 48 seconds 15H ; ; ADD THE APPLICATION PROGRAM HERE ; CMP EXIT_AP, 1 ;is the application over? JNE W_LOOP ;No, restart the application MOV AX, 6F02H ;disable Watchdog Timer MOV BL, 0 ; INT 15H ; ; EXIT ; 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PC 5153 15” Industrial wireless Panel PC D. HAZARDOUS MATERIALS DISCLOSURE D.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PC 5153 15” Industrial wireless Panel PC 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5153 15” Industrial wireless Panel PC 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
