User's Manual

3.3. Network Architecture
The ATD-300/ATD-301 pod is designed to work standalone, therefore the pod controls a
colocalised camera with the ONVIF protocol, and pushes a specific HTTP alarm for each type of
threat to a VMS system.
For maintenance and AI training purposes, the pod can be associated with the ATD server
software solution. In this case the pod will push the following to the server:
● Noise level every 1s
● State of Health every 15min
● Alarm in case of threat with raw signal (optional)
Figure 3: ATD IT architecture
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 12