User's Manual
4.2. First connection to the pod
All the setting of the ATD-300/ATD-301 is done with a web page generated by the pod itself. By
default the pod has no IP assigned, and is waiting for an IP coming from the DHCP server of the
network.
The first step is to connect a computer to the same local network than the pod.
With a web browser on your computer(Chrome is recommended), connect to the
ATD-300/ATD-301 pod using one of the following options:
● If you are on a network with DHCP server and name resolution service. Enter the
following address on your web browser: http://atdxxxx.local:8080 with xxxx the serial
number of you pod. For example, if you have the pod number 1500 then the address to
contact the pod is http://atd1500.local:8080
● If you are on a network with DHCP server, find the IP address of the pod using IP
scanner or request it to your IT department. Then enter the following address on your
web browser: http://<atd300_ip>:8080 with <atd300_ip> the IP V4 address provided by
the DHCP server. For example, if your pod has the IP V4 address 192.168.1.101 then
the address to contact the pod is http://192.168.1.101:8080
● If you have no DHCP server, or if you can not scan the IP address of your local network,
you can connect to the pod using the IP V6 address. The IP V6 address is written on the
delivery note provided with the ATD-300/ATD-301 pod. For example, if your pod has the
IP V6 address fa82::ba27:ebff:fed8:63e1 then the address to contact the pod is
http://[fa82::ba27:ebff:fed8:63e1]:8080
Please note that the web page is on the port 8080.
Figure 5: Web page to setup the ATD-300/ATD-301 pod
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 15