User's Manual

To set the pod to use the IP provided by the DHCP server, tick the Use DHCP field and Apply
the setting. The pod must be reboot to use the new setting.
To set the pod to use static IP address, fill Static IPv4 Address, the Static IPv4 Mask, the
Router Address and the DNS Address and Apply the setting. The pod must be reboot to use
the new setting.
Remark:
1. The Actual IPv4 Address is the IPV4 address actually used by the pod
2. The IPv6 Address is the static IPv6 address of the pod, it is important to store this IPv6
address to find the pod even if the IPv4 setting are incorrect
3. The MAC Address is the fixed MAC address of the ethernet interface
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 20