ACOEM Advanced acoustic detector : User's Manual : Page 27

If the pod is installed on a wall, with the Mic 1 normal to the wall, then the Installation mode “2 -

On a wall - Microphone 1 normal to the wall: 180° listening - Ground direction” has to be

selected. In this mode, the pod surveys at 180° in front of him. The installation procedure

(§5.2.3) presents this setup.

If the pod is installed on a wall, with the Mic 1 parallel to the wall, then the Installation mode “3

- On a wall - Microphone 1 parrallel to the wall: 180° listening - Ground direction” has to be

selected. In this mode, the pod surveys at 180° in front of him.

For the two last modes the connector has to be located on the wall side and never at the

external side.

Figure 16: Example of a pod installed on a wall

To apply the setting, click on the Save button and reboot the pod.

ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 27