User's Manual

4.6. Camera Setting
The ATD-300/ATD-301 is able to move a camera directly on the event in case of detection. To
do it, the Camera settings section in the Settings page has to be completed.
This part is not mandatory. If you have no camera to link to the pod, just keep the default setting
with the Onvif activation menu at False.
The requirement on the camera are:
● Colocalized with the pod
● Compatible with the ONVIF Profile S standard mode
● Have the PTZ absolute move capability
● Have a user credential for the pod with the ONVIF - PTZ permissions
● Be installed on the same private network
● Have the same time than the pod
Figure 17: Settings web page to setup the Camera with the Fixed and Mobile installation mode
The first step is to activate the Onvif mode, Select True on the Onvif activation menu.
Complete the Camera IP, port and credential for the camera and Update the settings.
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 28