User's Manual
Select the installation mode that you want to use. This option will change the way to enter the
angle between the Pod and the camera:
● The Fixed mode is more adapted to a fixed installation on a wall or mast. In this mode
the Pan 0° Orientation Beta (°) angle has to be measured. Beta is the angle in degrees
between the North and the Pan 0° of the camera.
● The Mobile mode is more adapted to a mobile application. In this mode the Gamma
angle in degree between the pod Microphone 1 and the Pan 0° of the camera has to be
measured and filled on the Mic 1/Pan 0° offset Gamma (°) field. The advantage of this
mode is in case if you move the trailer with the pod and the camera, you just have to
adjust the Mic 1 orientation Alpha (°) on the settings, and never adjust the camera
setting.
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 31