User's Manual

4.7. VMS Setting
For each type of threat detected by the pod (on the actual FW: Gunshot, Firecracker and
Sniper), the pod can send a specific alarm to a VMS using a http command.
This setting is not mandatory, and if you don’t need this feature, just let the field blank.
Figure 21: Settings web page to setup the VMS alarms
Please refer to the your VMS manual to define the URL and setup on the VMS the requested
action for each type of alarm.
The pod will send the specific alarm if a threat is detected.
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 33