User's Manual

4.8. ATD Server Settings
The ATD-300/ATD-301 can be configured to communicate with the ATD server software. The
ATD server software will be useful to:
● Log the threat
● Log and check the state of life of each pod
● Have a map with the noise level measured by each pod in real time
● Have a map with the threat detected by each pod in real time
● Store the frame of each event for AI training
This setting is not mandatory, and if you don’t need this feature, just let the field blank.
Figure 22: Settings web page to setup the ATD server communication
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 34