User's Manual

1. INTRODUCTION
Acoustic Threat Detection (ATD) sensors are small acoustic detection monitoring devices which
continuously analyze noise to detect, identify and localize threats. The pod performs all these
analyses on edge, in real time and can move directly a colocalized PTZ camera to the threat
direction. An alarm is also pushed by the IP network to a CCTV control room to focus your
operator on the incident, giving your responders the situational awareness they need.
This document presents the ATD-300 and ATD-301 sensor. It is the installation and setting
guide for the ATD-300 and ATD-301 pods.
Receipt of your equipment
This product was carefully inspected and tested prior to shipping. Nevertheless, you are
requested to check when opening the packaging that there is no sign of damage and that all the
accessories are included. If this is not the case, please notify ACOEM or its approved
representative without further delay. You are advised to keep the packaging in case you need to
return your equipment for maintenance at ACOEM’s premises.
Warning
Before using the product, read the instructions carefully, especially the safety instructions and
the installation section.
The safety instructions (§2) described in this manual should be adhered to and the
ATD-300/ATD-301 pod should always be used within the limits specified hereafter. Instrument
and operator safety is at risk when the instrument is used in conditions that are not intended by
ACOEM.
The Installation (§5) and Safety Instruction (§2) included in this user manual must be read by
the operator before installation or starting to operate. Print this document or use a computer or a
tablet to keep them available, especially during installation.
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 4