Manualshelf

User's Manual

ManualsBrandsACOEM ManualsElectronicsAdvanced acoustic detector
31323334353637383940
This step can take a couple of minutes, you will have the following message at the end of the
update process
Figure 27: Message at the end of a successful update process
To apply the new firmware, you have to reboot the system.
After the reboot, you can check on the Status page the actual Firmware version installed on the
pod
Figure 28: Firmware version installed on the ATD-300/ATD-301
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 40