User's Manual

5. POD INSTALLATION
The ATD-300/ATD301 is designed to be installed outside, at a height between 2.5m (8ft) and
10m (32ft).
The windscreen must be installed facing the ground. The ATD-300/ATD-301 is not designed
to be installed in any other direction.
The central M4 screw on the upper face is for grounding purpose (ie §2.4). Never fixed the
ATD-300/ATD-301 by this screw. It is not designed to support the weight of the pod, and the risk
of drop is extremely high.
5.1. Installation without bracket
For short time installation, the pod can be fixed to a mast using two metallics strips.
The ATD-300/ATD301 has 2 horizontal grooves of 1mm deep and 12mm high allowing to
maintain the metallic strips, and 3 vertical grooves to maintain the pod at a fixed position on the
mast.
Figure 30: Installation of the ATD-300/ATD-301 on a mast
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 42