User's Manual

For a safe installation the requirements below must be followed:
● The mast diameter has to be greater than 35mm
● The mast has to be designed to support the weight of the pod and all the additional load
entailed by the pod installation and external factor (wind, snow….)
● The metallic strip has to be selected to support the pod weight
● The metallic strip must be chosen to resist to climatic and environmental constraints
● The metal strip must be tight enough to prevent any movement
● Connect the Ethernet cable on the pod and fix the Ethernet cable on the mast to avoid
any mouvement
At the end of the installation please note the angle between the North and the Microphone 1
direction (ie §4.2).
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 43