User's Manual

5.2.3. Pod installation on the bracket
The ATD-300/ATD-301 is fixed on the bracket with 4 CHC M5x16 screws. The orientation of the
pod on the bracket is important. The Microphone 1 of the pod has to be normal to the wall.
Two marks are located on the pod to know the Mic 1 location:
● The pod has 3 grooves on the body parts separate by 90°. The microphone 1 is located
on the missing groove
● The Mic 1 is located by a small mark on the windscreen basement
Figure 34: Mic 1 localisation on the pod (bottom view)
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 47