User's Manual

The pod has to be located on the bracket with the no vertical groove side at the opposite to the
wall or mast.
Figure 35: Orientation of the pod on the Bracket
When the pod is oriented on the bracket, use the 4 CHC M5x16 screws and the washer to fix
the pod on the bracket
Figure 36: Fixation of the pod on the bracket
At the end of the installation please note the angle between the North and the Microphone 1
direction (ie §4.2).
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 48