User's Manual

You can test the installation with the following ssh command on the server (CTRL+C to stop it):
$ cd /atd_server
$ sudo docker-compose up
To have an automatic start of the software when the server boots, the following SSH commands
have to be executing on the server terminal:
● Create the ATD server service and launch rules:
$ sudo nano /etc/systemd/system/docker-compose-atd.service
[Unit]
Description=ATD server with docker compose
Requires=docker.service
After=docker.service
[Service]
Type=oneshot
RemainAfterExit=true
#Directory with the docker-compose.yml file
WorkingDirectory=/atd_server/
ExecStart=/usr/local/bin/docker-compose up -d
--remove-orphans
ExecStop=/usr/local/bin/docker-compose down
[Install]
WantedBy=multi-user.target
● Start the docker and ATD server service:
$ sudo systemctl daemon-reload
$ sudo systemctl enable docker
$ sudo systemctl enable docker-compose-atd.service
$ sudo systemctl start docker-compose-atd.service
$ sudo systemctl status docker-compose-atd.service
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 52