User's Manual

2.8. Cleaning
● Disconnect the instrument before attempting to clean.
● Use non aggressive products to clean the instrument, as diluted detergent (dishwashing
liquid, or soap)
● Do not insist on labels to avoid erasing them.
2.9. Service
The disassembly for internal repair is prohibited.
The service of the device has to be performed by a qualified person using only the original
replacement part. This will ensure that the safety of the instrument is maintained.
Exposition to full sun can raise the temperature of the system.
2.10. Information to user
Caution: changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2.11. Information to user
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 9