User's Manual

17
Brand of ACOEM
1.13 STATUS INDICATIONS
1.13.1 Status summary
The status is indicated at the bottom of the right hand side of the screen
 General status
o Date and time
o Battery level of the instrument
 During analogic measurement
o Input overload indication in percentage of time.
o Sensor integrity indicator
 During wireless measurement
o Sensor overload indication in percentage of time.
o Battery level of the sensor
1.13.2 Status panel
If you click on the status summary, the status panel appears on the right hand side of the screen. It shows the
following information:
 Wi-Fi:
o Off: Wi-Fi is disabled in Shortcuts > Setting >
o Not connected: the instrument is not connected to a WLS sensor or another Wi-Fi network
o WLS_xxxxx: the instrument is connected to a WLS sensor, xxxxx is the serial number of the sensor.
o Network: Wi-Fi is connected to a network.
 Sensor battery: this information shows the battery level of the WLS sensor. It is not displayed if the
instrument is not connected to a WLS sensor.
 System battery: this information shows the battery level of the instrument.
 Next calibration date: display the recommended date for the next calibration.
 The amount of available memory.