User's Manual

Brand of ACOEM

1.14.4 Vocal note

Before using a headphone, please read the safety instructions delivered with the instrument (printed and on the

CDROM)

From Collect module, measurement list screen: take a vocal inspection note.

Record: record your comment.

Make sure you set the volume to a low level before starting to listen

Play: listen to the comment

For this function, you must have the optional 3.5 mm jack adapter on connector D (ref: CPC1229000 - FALCON

ECTD-JACKF).

1.14.5 Barcode

From the Collect module, measurement list screen: read the barcode (QR code format):

Notes:

 If the code is unknown, the system suggests associating it to the current point (learning mode). The

association is then memorized for a future collection.

 If a point in the route is already associated with the code, the system goes directly to this point.

1.14.6 Listening to the signal

Before using a headphone, please read the safety instructions delivered with the instrument (printed and on the

CDROM)

 From the Collect module, measurement list screen: listen to the signal of the sensor

 From the Collect module, time wave display screen: listen to the recorded signal

Make sure to set the volume to a low level before starting to listen

Press to start and then adjust the level to your convenience.

For this function, you must have the optional 3.5 mm jack adapter on connector D (ref: CPC1229000 - FALCON

ECTD-JACKF).

Note: if a triaxial sensor is used, the live output is the Z axis of the sensor.