User's Manual

Brand of ACOEM

 Replacement instructions:

o Remove the battery:

 Unscrew the 2 screws of the battery trapdoor.

 R

emove the connector by gently pulling the two cables. It should come off easily. In the case

of an abnormal resistance, do not force and contact our after-sales service.

 Remove the battery.

o When setting up the battery, be sure to not pinch or crush the cables.

Check the orientation of the battery pack. The wire output must be placed beside the connector to

avoid crushing by the trapdoor.

o When inserting the battery, make sure not to hurt the pack. The insertion must be done without forcing

excessively. When in doubt, pull out the battery and check that nothing is blocking its insertion.

o Check the orientation of the connector. The coding should be facing up.

o To insert the connector, hold it with the cables.

o Check that trapdoor does not crush the cables by pushing them to the right hand side.

Screws

Coding