User's Manual

Brand of ACOEM

1.16 REMOTE DISPLAY & CONTROL FUNCTION

Procedure to take control of FALCON from a PC:

 Install Real VNC Viewer ® on the PC

 FALCON must be first networked by Ethernet (see § 1.12.3) or by Wi-Fi (see § 1.12.4) with the PC

 To work also with WLS Sensor, use the ‘Direct Wi-Fi connection PC- FALCON-WLS setting’ configuration.

 Run Real VNC Viewer ®

 Set the Input Server address: IP address of FALCON or its hostname (e.g., Falcon_10015) if there is a

DNS.

 It is then possible to control FALCON from the PC.

Note: it is possible to protect this access with a password: see § 2.10