User's Manual

50
Brand of ACOEM
3.6 UPLOAD A MEASUREMENTS TO NEST
3.6.1 With direct connection to the PC
 On FALCON:
o Set the connection between PC and FALCON: see § 1.12.
o From FALCON home screen, select the “Communication” module:
 On the PC (for more details see NEST documentation)
o Run NEST software:
o Input your login
o Select Collect module
o “Collector” tab: Select “Direct transfer” and the type of connection:
 USB: if you connect FALCON connector H with a USB port of the PC. The PC
automatically selects the connected instrument and creates it in the list if necessary.
 Ethernet: if you connect FALCON and the PC on the same network (Ethernet or Wi-Fi).
Once the connection is set, the line is
highlighted in orange, you can now go in the “Instrument
→ NEST
” tab.
o “Instrument → NEST” tab: you can see the route of the instrument. Select the routes to be
transferred
o Click on the function “Send” in the menu bar and wait until the operation is completed.
3.6.2 Through intermediate file
 On FALCON:
o Go to “Collect” module
o If you are using a USB memory stick, insert it in the port G behind the trapdoor.
o Select the route to Export.
o Click on Export
o A file is created in the Export folder of the USB memory stick or in the instrument internal memory
if USB is not used. File name is: ONEPROD_xxxx_Route-name_YYYYMMDD-HHMMSS.zdl,
where xxxx is the instrument serial number and YYYYMMDD-HHMMSS the last measurement
date.
 On the PC (for more details, see NEST documentation)
o Connect the memory with the zdl file to the PC or copy the file to the PC.
o Run NEST software:
o Input your login
o Select Collect module:
o “Collector” tab:
 Select “Via intermediate files”
 Select the instrument in the list (Create it if necessary with the “Add” function)
o “Instrument → NEST” tab:
 Click on the function “Add” in the menu bar
 Select the .zdl file
 Select the .route to be uploaded
 Click on the function “Send” in the menu bar
 Wait until the operation is completed.