User's Manual

51
Brand of ACOEM
3.7 OFF_ROUTE
“OFF_ROUTE” is a specific route. It is used to take make measurement on machines not loaded from the PC.
It is possible at any time to create a new machine by copying/pasting any machine from a standard route or from
the “OFF_ROUTE” itself
Expert Off_route mode (if included in the license) gives also access to the functions:
Create a new machine using a point template
Create a new measurement on a group of points using a template
Modify the properties of a measurement.
Notes:
 Measurements done in Off-Route mode cannot be uploaded to NEST without Collect module.
 Off-route does not allow map navigation
 You can load a special route used as template for your OFF_ROUTE measurements
3.7.1 Copy/paste a machine from a standard route
From a standard route, measurement list screen:
Open the route explorer
If your are in map mode, select List mode
If your are in a list of machine points, go up to next level to display the list of machines
Display additional functions
Select the machine to copy in the list
Copy selected machine to the clipboard
Go to directly OFF_ROUTE
Paste the machine at the end of the list. If the machine already exists, 3 digits are added in the name
Use this function if you want to change the name of the machine
Go back to “Measurement list” screen to take measurements
3.7.2 Copy/paste a machine inside OFF_ROUTE
From OFF_ROUTE, measurement list screen:
Open the route explorer
If your are in a list of machine points, go up to next level to display the list of machines
Display additional functions
Select the machine to copy in the list