User's Manual

Brand of ACOEM

6.3 APPENDIX 2: MAIN NEW FUNCTIONS

6.3.1 Version 1.10

Each new function listed below is described in the corresponding chapter. To help you spot the upgrades of this

new version within a chapter, they are written in italics.

 New Off-route functions (only for licence with Expert Off-route):

o Function to create a machine in Off-route: see § 3.7.3

o Function to create a new measurement on a group of point in Off-route: see § 3.7.4

o Function to modify a measurement on a group of point in Off-route: see § 3.7.5

 Possibility to use the WLS sensor as a single axis sensor: see § 3.5.8

 The choice of Wi-Fi channel for the WLS sensor has been change from 1, 5, 9, 13 to 1, 6, 11 to meet

international requirements: see § 2.3.

WARNING: compatible versions

 WLS: It is required to update the WLS sensor to firmware version v1.08.

To update the WLS sensor see § 5.6

 NEST: It is required to update NEST software to version v2.13

To update see NEST user manual § 2.4

6.3.2 Version 1.05

 Improvement of spectrum and time-wave display: see § 3.5.3

o Cursors are automatically positioned on the closest peak

o New types of cursors: double, harmonic and side band.

o Zoom function

 For machines with automatic diagnosis, status display of vibration velocity and defect factor parameters.

6.3.3 Version 1.04

 New preferences for amplitude conversion used to spectrum and envelop display: see § 2.5

 Collector module: for the automatic diagnosis, possibility to modify predefined rotation speed of fixed

rotation speed machines using the stroboscope: see § 1.14.8 and 3.5.4

 Balancing module: possibility to measure spectrum without the tacho from the free run screen: see § 4.7