User's Manual

11
Brand of ACOEM
1.4. EAGLE ACCESSORIES
Figure 8: Eagle accessories
Model
Description
EGL 1201 000
Power over ethernet PoE IEEE 802.3af
EGL 1202 000
Primary cell SAFT LS33600 Li-SOCl2, 3.6V, 1.7Ah, D cell
EGL 1203 000
O-ring seal NBR 70 SH Ø int 37,82mm x Ø tore 1,78mm (UL)
EGL 1204 000
Suitcase
EGL 1205 000
Special wrench for Eagle sensor/expander tightening
EGL 1206 000
Special tool for Eagle triaxial sensor orientation (use with ACA1029000)
EGL 1207 000
Galvanic isolator for hazardous environments
EGL 1208 000
Tough Ball-joint mounting for Eagle gateway
EGL 1209 000
Tough Ball-joint mounting for Eagle expander
EGL 1210 000
Eagle protective shield
EGL 1211 000
(Option) Fall protection ring for operating at height (off-shore)
1.4.1. Mounting accessories for expander and gateway: RAM mounts
a. Fixed installation mounting accessories
The mounting accessories from RAM mounts supplied are limited to those mentioned below.
It should be noted that there are other types of compatible mounts. These options are not
available in the OneProd catalog.
Table 6: ball-joint mount references for expander mount (EGL1209000)
Description
Reference RAM
RAM 1" Tough-Ball™ with M6-1 x 6mm Male Threaded Post
RAP-B-379U-M616
RAM Double Socket Arm for 1" Ball Bases
RAM-B-201U
RAM 1.5" x 3" Rectangle Base with 1" Ball
RAM-B-202U-153
Table 7: ball-joint mount references for gateway mount (EGL1208000)
Description
Reference RAM
RAM Short Double Socket Arm for 1.5" Ball Bases
RAM-201U-B
RAM Topside Base with 1.5" Ball
RAP-395T-BCU
RAM 75mm x 75mm VESA 3.625" Plate with 1.5" Ball
RAM-2461U
Ensemble des accessoires