User's Manual

10
www.acoemgroup.com
[e-mail]
Copyright © 2014 - 01dB-Metravib SAS
This document is the property of 01dB-Metravib SAS. Any dissemination, copying or publicising of this document, in whole or in
part, is prohibited without the owner’s written authorisation
RF exposure: This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
5.6. DISMANTLING / RECYCLING
 The disposal or recycling of batteries must comply with the applicable directives of
your country.
 The disposal or recycling of the Eagle devices must be in accordance with the valid
directive on waste electrical and electronic equipment (WEEE) (2012/19/EC).
 Gateway, sensor, expander and their accessories should be recycled as electronic
products including a battery.
 Gateway, sensor, expander and their accessories should not be burnt or thrown into
fire.
 Gateway, sensor, expander and their accessories should not be disposed in a dump.
6. ANNEX: SUMMARY OF MARKING MEANING FOR HAZARDOUS AREAS
The information below is general and should consulted beings as such. Read carefully the
labeling of each product.
Product intended for explosive atmospheres
I / II Applications
I = Mining industry applications
II = Surface industry applications
1 / 3 Explosive zones for surface industry
1 = intended for Zone 0 (gas) with a permanent explosive atmosphere. EPL level Ga.
3 = intended for Zone 2 (gas) where an explosive atmosphere may only appear accidentally, in
case of malfunction of the installation. EPL level Gc.
M1 Explosive zone for mining industry Zone 0 (gas) with a permanent explosive atmosphere.
G Gas atmosphere
Ex Protection against explosions
ia / ic Protection modes intended to prevent explosion
ia for flammable material always present or for long periods Zone 0
ic for Irregular / short term presence of gas (abnormal) Zone 2
IIC Devices intended to operate in presence of the most explosive substances: hydrogen, acetylene,
ethyl nitrate …
IIC product is automatically suitable for groups IIA and IIB.
Ga / Gc Equipment protection level
EPL A = for permanent or frequent presence of gaz (zone 0)
EPL C = for Irregular / short term / abnormal presence of gas (zone 2)
T4 Gas surface temperature pour an ambiante temperature Ta.
< 135°C [275°F] pour -xx°C<Ta and +xx°C
LCIE ATEX certificate number provided by notified body (LCIE)
IECEx Certificate of conformity to IEC standards (Certification scheme IECEX)
X Indication of particular condition(s) of use