C H A N N E L I N S TA L L AT I O N G U I D E S L I D E - I N T I LTA B L E S TA N D Complete Integrated LED Lighting Solutions Tech Support: 212.629.
M AT E R I A L L I S T (A) (B) (C) (D) Slide-In Tilt Stand Screw Channel Rubbing Alcohol (E) (F) (G) Double Sided Tape RibbonLyte Lens PA G E 1 All artwork and images copyright Acolyte Industries Inc. Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P S 1 - 4 1 Space your tiltable stands every meter and make marks where the holes in the stand are to mark your screw locations. If the channel length is shorter than 1 meter, use two tiltable stands placed several inches from the end of edge of the channel. 2 Drill a pilot hole for the mounting clip screws at each of the marks you have made along the mounting path. 3 Screw the Slide-In Tilt Stand (A) into place using the appropriate screws (B).
I N S TA L L AT I O N - - S T E P S 5 - 8 5 Clean the mountain surface free of dust and debris using rubbing alcohol (D) and a cloth. 6 After surface is dry, apply 1/16” double-sided tape (E) to the inside of the channel, along the mounting path. (D) (E) 7 Remove the top adhesive layer from doublesided tape (E). 8 Remove the backing from the RibbonLyte (F) that you are going to be applying atop the double-sided tape. (F) (E) PA G E 3 All artwork and images copyright Acolyte Industries Inc.
I N S TA L L AT I O N - - S T E P S 9 - 1 0 9 Apply the RibbonLyte (F) by placing one end of the strip at the end of the double-sided tape (E) inside the channel (C) then slide your finger along the RibbonLyte (F) to make sure there is firm contact and that the tape adheres well. (F) (C) 10 Slide or snap the lens (G) into place. (G) (G) PA G E 4 All artwork and images copyright Acolyte Industries Inc. Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
I N S TA L L AT I O N - - S T E P 1 1 11 - Insert screws into the end cap Installation is complete. PA G E 5 All artwork and images copyright Acolyte Industries Inc. Use or reprinting prohibited unless explicitly approved by Acolyte Industries.