User Manual

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
INSTALLATION -- STEPS 9-10
9
10
Slide or snap the lens (G) into place.
PAGE 4
Apply the RibbonLyte (F) by placing one end
of the strip at the end of the double-sided tape
(E) inside the channel (C) then slide your nger
along the RibbonLyte (F) to make sure there is
rm contact and that the tape adheres well.
(G) (G)
(C)
(F)