User's Manual
25
Fig. 5-6 Menu: RESTORE DEFAULT SETTINGS
6. REMOTE CONTROL
6-1. General information
The ACOM 1200S may be controlled remotely by the RS232 port.
The ACOM 1200S RS232 interface protocol is available on www.acom-bg.com.
7. MAINTENANCE
W A R N I N G HIGH VOLTAGE!
The mains line voltage and a high DC voltage of up to 500V
inside the ACOM 1200S amplier are both LETHAL! For
your safety, pull the amplier power plug out of the mains
wall outlet and WAIT AT LEAST three minutes EACH TIME
BEFORE servicing the amplier!
7-1. Periodic maintenance; general checks and cleaning
a) Periodically (but at least once per year) check all connections, contact cleanliness and the
tightening of all connectors, in particular the coaxial ones.
Check the integrity of the cables, in particular when they are layed on the oor. Check also if the cables
are secured well in the area where they come out of the connector body.
Pay particular attention to the mains plug and the wall outlet – if you have any doubts consult with an
electrician.