User's Manual
23
5-4. “USER PREFERENCES” menu
Fig. 5-4 – Menu USER PREFERENCES
a) ANTENNA TUNER/SWITCH INSTALLED.
If ACOM 04AT remote automatic antenna tuner is also installed, select YES. Refer to ACOM 04AT
Operating Manual.
b) AUTOMATIC MENU EXIT.
When the option is turned on, the amplier exits the currently selected menu if no button has been
pressed for more than 5 minutes.
If the option is turned off, the amplier remains in the currently selected menu until the EXIT button is
pushed.
c) AUTO OPERATE.
The AUTO OPERATE option is described in Sections 3-3, 4-1(c), and 4-6(b).
d) CALL SIGN
If entered here, a call sign (or another text) will be included in any Fault Log le generated by the
amplier. The call sign (or another text) will not replace ACOM 700S logo on the startup screen.
Use the SELECT button to select the character position. The ITEM button changes the characters.
Finish by moving the pointer out of the editable elds by means of the Left SELECT button.
e) OPERATE ACCESS
When locked, the amplier remains in Standby and cannot be switched to Operate unless unlocked in
the same menu. Passwords are not used – this is only a simple protection against possible child actions,