Operating manual MODEL : PC-100 POS ECR Interface ACOM 1
Gratitude Thank you for your purchasing our product, we are always trying to serve you with a good quality as a reliable weighing instrument and enhanced features to supporting various kinds of conveniences of conveniences Specifications PC-100 ( ECR Interface ) Items Minimum graduation 6 kg 15 kg 30 kg 2g 5g 10 g Maximum Tare Full tare A/D update speed 9 times / sec. Internal resolution 60,000 Display(digit) VFD Weight(5) Operating temp. -10℃ ~ 40℃ Humidity RH.
Names of the parts 3
Unpacking and assembly Open the carton box and take out packed scale Place the scale on the rigid desk. Remove packing Styrofoam and vinyl packaging Put in display assembly into the display bracket of the scale. Fasten display pole with two of M4 screws. Arranging harness wire into the display pole. Fasten bottom cover on display bracket with four of M3 screws.
Function of each key Name of key 0 9 C Function This key is used to set numbers This key used to clear numbers ZERO This key used to correct zero shift, activated on stable marked TARE This key used to entering tare weight, activated on stable marked * Printer version This key is used to print Battery version This key is used to restart the scale from standby mode in battery used Designators and functions Designators “ZERO” “STABLE” “NET” “BATT” Functions It indicates centered zero It indicates
Using Battery(optional) Scale works by battery when not in using AC power, please read carefully for the best condition of rechargeable battery, while scale is being worked by battery the designator “BATT” is indicated First operation from delivery The battery may be exhausted during a long delivery or other reasons, please charge the battery fully. Charging times Times for a full charged battery are 11 hours with scale turned on and 15 hours with scale turned off.
Operation 1. Setting a waiting time(optional) • Press “*” key with empty platter(zero status) timE • Press “*” key again, number displayed means waiting time in second • Waiting time changes by pressing “TARE” key 15 seconds interval up to 3 minutes, choose a time *Set time “0”for a continues operations 30 45 • Press”*”key to programming and exit to normal mode 0 •Remove commodity 0 •Remove tare and press “TARE” key, designator “NET” it turned off 0 2.
3. Weighing with tare A. Unknown Tare • Place the tare on the platter 156 • Press “TARE” key, designator “NET” is turned on 0 • Put commodity on the tare 324 • Read weight after designator “STABLE” marked on 324 • Remove commodity 0 • Remove tare and press “TARE” key, designator “NET” is turned off 0 4.
ECR Interface Instructions for Setting the RS-232 Port If you have Purchased your PC-100 scale with the RS-232 kit you will be Able to interface you scale to a PC or virtually any ECR(Electronic Cash Register) if you do not have this Feature or aren’t sure. Please contact your local ACOM Authorizes Dealer to assist you. The following page will explain the RS-232setup. Type Setting: The PC-100 communicates using the following protocol: 9600 Baud, Even Parity, 7 Data, and 1 Stop Bit.
There are also cable diagrams on the following pages for most devices.
ACOM Inc.