Installation manual

Examining Filers

Focusing on One Share

CLI Storage-Management Guide 5-9

Focusing on One Share

To focus on one share, use the share argument in the show exports command:

show exports host filer share share-name

[user username windows-domain domain | proxy-user proxy]

where

share-name (1-1024 characters) identifies the share, and

the other options are explained above.

This shows the default report, but only with entries that are relevant to the share. For

example, the following command focuses on the ‘histories’ share.

bstnA6k> show exports host 192.168.25.20 share histories proxy-user acoProxy2

Export probe of filer “192.168.25.20”

Connectivity:

Slot.Proc Proxy Address Ping (size: result)

--------- --------------- -------------------

3.1 192.168.25.31 64: Success 2000: Success 8820: Success

3.2 192.168.25.32 64: Success 2000: Success 8820: Success

3.3 192.168.25.33 64: Success 2000: Success 8820: Success

3.4 192.168.25.34 64: Success 2000: Success 8820: Success

3.5 192.168.25.55 64: Success 2000: Success 8820: Success

3.6 192.168.25.56 64: Success 2000: Success 8820: Success

CIFS Credentials: MEDARCH\jqpublic

Capabilities:

CIFS

Security Mode User level, Challenge/response, Signatures disabled

Server TCP/445

Max Request 16644 bytes

CIFS