Installation manual

Adding an External Filer
Listing External Filers
CLI Storage-Management Guide 6-7
For example, the following command lists all of the external filers known to the
ARX:
bstnA6k(gbl)# show external-filer
Name IP Address Description
------------------------ ------------- ----------------------------
das1 192.168.25.19 financial data (LINUX filer, rack 14)
fs2 192.168.25.27 bulk storage server (DAS, Table 3)
fs1 192.168.25.20 misc patient records (DAS, Table 3)
nasE1 192.168.25.51 NAS filer E1
fs3 192.168.25.28 Hematology lab server (DAS, Table 8)
fs4 192.168.25.29 prescription records (DAS, Table 3)
das2 192.168.25.22 DAS (Solaris) filer 2 (rack 16)
das3 192.168.25.23 DAS (Solaris) filer 3 (rack 16)
nas1 192.168.25.21 NAS filer 1 (rack 31)
192.168.25.61 (secondary)
192.168.25.62 (secondary)
das7 192.168.25.24 Redhat-LINUX filer 1
das8 192.168.25.25 Redhat-LINUX filer 2
nas2 192.168.25.44 NAS filer 2 (rack 31)
nas3 192.168.25.47 NAS filer 3 (rack 32)
bstnA6k(gbl)# ...
Showing External-Filer Details
Identify a particular filer with the show external-filer command to see details about the
filer:
show external-filer filer-name
where filer-name (up to 64 characters) is the name given to the external filer.
For example, the following command shows the DAS filer named “das1:”
bstnA6k(gbl)# show external-filer das1
Filer “das1” Configuration
Description financial data (LINUX filer, rack 14)