Installation manual

Adding an External Filer
Samples - Adding Two Filers
6-8 CLI Storage-Management Guide
Filer IP 192.168.25.19
CIFS Port default (auto-detect)
NFS TCP Connections 1 (default)
Managed Exports
--------------------------------------------------------------------------------
NFS Export: /exports/budget
Namespace: wwmed
Volume: /acct
Directories to ignore for importing
------------------------------------
.snapshot
bstnA6k(gbl)# ...
Showing Details for all External Filers
Use show external-filer all to see details about every configured external filer:
show external-filer all
Samples - Adding Two Filers
The following command sequence adds two filers to an ARX. The first filer offers
three NFS exports and has an IP address of 192.168.25.19. The second filer offers two
CIFS shares and has an IP address of 192.168.25.20.
This sequence begins after the filers are connected to the switch through IP
configuration:
bstnA6k(gbl)# external-filer das1
This will create a new filer.
Create filer 'das1'? [yes/no] yes
bstnA6k(gbl-ext-filer[das1])# ip address 192.168.25.19