Installation manual

Configuring Front-End Services
Showing All Front-End Services
11-42 CLI Storage-Management Guide
% INFO: no export insur_bkup /insurShdw as CLAIMS_BKUP
prtlndA1k# ...
Showing All Front-End Services
Front-end services are identified by the FQDN of their respective global servers. Use
the
show global service command to show all front-end services configured on the
ARX:
show global service
For example:
bstnA6k(gbl)# show global service
Domain Name Service State
--------------------------------------------------
www.wwmed.com NFS Enabled
acopiaFiler NFS Enabled
ac1.medarch.org CIFS Enabled
insur.medarch.org CIFS Enabled
insur.medarch.org NFS Enabled
bstnA6k(gbl)# ...
Showing Front-End Services for One Global-Server
To see the front-end services for one global server, identify a particular global server
with the
show global service command:
show global service fqdn
where fqdn (1-128 characters) is the fully-qualified domain name (for example,
www.company.com) for the global server.
For example, the following command shows the front-end services for the global
server at “www.wwmed.com:”
bstnA6k(gbl)# show global service www.wwmed.com