Installation manual

Configuring Front-End Services

Showing All Front-End Services

CLI Storage-Management Guide 11-43

Domain Name Service State

--------------------------------------------------

www.wwmed.com NFS Enabled

bstnA6k(gbl)# ...

Showing Front-End Services per Virtual-Server

You can show the front-end services running at each virtual server, with the VIP and

current health of each service. To see the front-end services grouped by their virtual

servers, use the

show virtual service command:

show virtual service

For example:

bstnA6k(gbl)# show virtual service

Switch bstnA6k

------------------------

Global Server Virtual IP Address Service State

------------------------------------------------------------------------

acopiaFiler 192.168.25.12 NFS Ready

www.wwmed.com 192.168.25.10 NFS Ready

ac1.medarch.org 192.168.25.15 CIFS Ready

insur.medarch.org 192.168.25.14 CIFS Ready

insur.medarch.org 192.168.25.14 NFS Ready

bstnA6k(gbl)# ...

In a redundant pair, this shows both peers and the virtual services that are running on

each. For example:

prtlndA1k# show virtual service

Switch prtlndA1k

------------------------

Global Server Virtual IP Address Service State

------------------------------------------------------------------------