Installation manual

Configuring Front-End Services
Showing Server Maps
CLI Storage-Management Guide 11-45
Showing Server Maps
You can show the map between front-end services and the back-end servers behind
them. From any mode, use the
show server-mapping command:
show server-mapping
This displays a two-column table, where the left column shows the client-side view
and the right column shows the server side. Each front-end export has its own listing
of back-end filers. For example, the following command shows all front-end exports
on the “bstnA6k” switch with their backing filers:
bstnA6k(gbl)# show server-mapping
Virtual Server Namespace/Volume
Virtual Path Physical Server
-----------------------------------------------------------------------
192.168.25.10:/acct wwmed:/acct
das1:/exports/budget
das3:/data/acct2
das7:/lhome/it5
das8:/work1/accting
nas1:/vol/vol1/meta1*
192.168.25.12:/vol medco:/vol
vol0/corp nas1:/vol/vol0/direct/shr
vol0/notes nas1:/vol/vol0/direct/notes
vol1/mtgMinutes nas2:/vol/vol1/direct/mtgs
vol1/sales nas2:/vol/vol1/direct/export
vol2 nas3:/vol/vol2/direct/data
192.168.25.14:/claims insur:/claims
nas1:/vol/vol1/meta2*
nas1:/vol/vol1/NTFS-QTREE/insurance
nasE1:/root_vdm_4/patient_records