Installation manual

Configuring Front-End Services
Showing Server Maps
11-48 CLI Storage-Management Guide
vol0/corp 192.168.25.21:/vol/vol0/direct/shr
vol0/notes 192.168.25.21:/vol/vol0/direct/notes
...
bstnA6k(gbl)# ...
Showing the Servers Behind One Virtual Server
To focus on one virtual server, add its VIP to the end of the command:
show server-mapping virtual-ip vip [ip-addresses]
where
vip identifies the VIP (for example, 172.16.77.75), and
ip-addresses (optional) is explained above.
For example, the following command shows the filers behind “192.168.25.15.” This
VIP has multiple exports (described in the next chapter), and every export draws from
the same set of filers:
bstnA6k(gbl)# show server-mapping virtual-ip 192.168.25.15
Virtual Server Namespace/Volume
Virtual Path Physical Server
-----------------------------------------------------------------------
\\192.168.25.15\ARCHIVES medarcv:/rcrds
\\fs1\histories
\\fs2\bulkstorage
\\fs4\prescriptions
nas1:/vol/vol1/meta3*
\\192.168.25.15\CELEBS medarcv:/rcrds
\\fs1\histories
\\fs2\bulkstorage
\\fs4\prescriptions
nas1:/vol/vol1/meta3*