Installation manual

Preparing for CIFS Authentication
Configuring the NTLM Authentication Server
3-8 CLI Storage-Management Guide
Displaying Detailed Server Status
Use the show ntlm-auth-server status command to display detailed status information
on one or more configured Secure Agent servers. This command shows how the
servers are configured to a switch.
show ntlm-auth-server status [name]
where name (optional, 1-128 characters) is the name of a Secure Agent server
instance. If no name is specified, this command shows names for all configured
Secure Agent servers.
For example, the following command displays detailed status information on a Secure
Agent server at Connection #1 and Connection #2.
bstnA6k> show ntlm-auth-server status
******************** SECURE AGENT STATISTICS *******************
Agent IP : 192.168.25.102
Agent Port : 25805
Uptime: 287 days, 15 hours, 52 minutes and 4 seconds
Current Connections: 28
Failed connection attempts: 326
Successful connection attempts: 73120
Account Scan Interval: 300
ADSI status : disabled
Software version: Version 1.02.000.06275 (Nov 7 2004 22:23:52) [nbuilds]
Connection #1
Source IP: 10.54.220.200
Duration: 138335 (seconds)
bytes Received: 48
bytes Transmitted: 168
Successful Client Authentications: 1
Failed Client Authentications:
No Such User : 0
Bad Password : 0
Locked out : 0