Installation manual

Preparing for NFS Authentication
Adding a NIS Domain
CLI Storage-Management Guide 4-5
auto_1
...
medtechs
surgeons
Total Netgroups: 2396
bstnA6k(gbl)# ...
Showing the Members of One Netgroup
For a list of members in a NIS netgroup, add the name of the netgroup to the end of
the
show nis netgroup command:
show nis netgroup domain netgroup
where
domain (1-256 characters) identifies the NIS domain, and
netgroup (1-1024 characters) is the specific netgroup.
This shows the host machines in the netgroup, along with their IP addresses. The
ARX does not authenticate users and groups, so it does not use those IDs from the
netgroup. The back-end filers authenticate users and groups, and the switch either
allows or disallows client access based on the result.
For example, this shows the host machines in the “medtechs” netgroup:
bstnA6k(gbl)# show nis netgroup wwmed.com medtechs
Netgroup successfully resolved.
Hostname IP Address
-------------------------------------------------- -----------------
bench2.wwmed.com 10.51.201.72
bench3.wwmed.com 10.51.201.73
bench4.wwmed.com 10.51.201.74
Total Resolved Hosts: 3
bstnA6k(gbl)# ...